Need Source for Black Chassis Paint - ZR-1 Net Registry Forums

Jagdpanzer · 07-21-2013

I'm changing the engine out and would like to spiff up the engine bay. A couple of areas need the paint touched up. Anyone have a good recommendation for C4 chassis semi gloss black paint preferably in a rattle spray can?

LGAFF · 07-21-2013

Try eastwood....or MidAmerican Designs/Corvette carries alot of corvette correct colors

secondchance · 07-21-2013

Quote:

Originally Posted by Jagdpanzer

I'm changing the engine out and would like to spiff up the engine bay. A couple of areas need the paint touched up. Anyone have a good recommendation for C4 chassis semi gloss black paint preferably in a rattle spray can?

Must be getting close!
I would use this and if too flat go over with satin black after POR15 has cured completely.

http://www.eastwood.com/rust-encapsulator-28193.html

RICKYRJ1 · 07-21-2013

Quote:

Originally Posted by secondchance

Must be getting close!
I would use this and if too flat go over with satin black after POR15 has cured completely.

http://www.eastwood.com/rust-encapsulator-28193.html

I agree or if it is to much of a hassle just put that engine in my car. Will she be ready for Carlisle?

LT5-1935 · 07-21-2013

Quote:

Originally Posted by secondchance

Must be getting close!

http://www.eastwood.com/rust-encapsulator-28193.html

EASTWOOD

HAWAIIZR-1 · 07-21-2013

Quote:

Originally Posted by secondchance

Must be getting close!
I would use this and if too flat go over with satin black after POR15 has cured completely.

http://www.eastwood.com/rust-encapsulator-28193.html

Phil

I'm with Yun on this one and love the POR-15 that I did my chassis with; they do have semi-gloss and it will last your lifetime and more. I don't think they have rattle can though, but it does brush on nicely without evidence of brush strokes, etc. You can whack it with a hammer and it won't chip or get damaged.

batchman · 07-23-2013

For rattle can stuff Rustoleum Appliance Epoxy is hard to beat.

Have had trouble painting over POR-15 but that could have been too soon.

Cheers,
- Jeff

07-21-2013	#1
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,661	Need Source for Black Chassis Paint I'm changing the engine out and would like to spiff up the engine bay. A couple of areas need the paint touched up. Anyone have a good recommendation for C4 chassis semi gloss black paint preferably in a rattle spray can? __________________ Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake

07-21-2013	#2
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,194	Re: Need Source for Black Chassis Paint Try eastwood....or MidAmerican Designs/Corvette carries alot of corvette correct colors __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359

07-23-2013	#7
batchman Join Date: Jun 2009 Location: I live at Devens, one run at a time Posts: 455	Re: Need Source for Black Chassis Paint For rattle can stuff Rustoleum Appliance Epoxy is hard to beat. Have had trouble painting over POR-15 but that could have been too soon. Cheers, - Jeff __________________ [I]91 ZR-1 #1840, autocrossing in SCCA BSP. FIC S/S's DRM chip/Watson/Borla/lid/LW batt&headlights, springs, shocks, pads & lines, quick rack & Turn One, camber brace, 32/22mm sways, A/C halfway deleted 17x11 & 12 CCW's, 315 & 335 Hoosier A6s [/I]