Want to stack my Z, can you identify this lift?

[Alberta_ZR1]

Hey guys,

I want to buy a lift so I can stack the ZR1 up out of the way. Can any of you identify this lift? It looks like it is respectively small in height which would be perfect for the single bay of my triple. I emailed the guy who was selling the Viper pictured, but he never responded.

Thanks ZR1 friends

[Coupe89]

Kinda of the same



http://www.asedeals.com/single_post_storage_lifts.html

[Alberta_ZR1]

Excellent!! Thanks for the help.

Big bucks on these "storage" lifts.

Thanks again!

[Daniel_Mc]

A 4 post parking lift will not take much room and would be a LOT more sturdy. What measurements are you dealing with?

-Daniel

[cvette98pacecar]

Originally Posted by Alberta_ZR1

Hey guys,

I want to buy a lift so I can stack the ZR1 up out of the way. Can any of you identify this lift? It looks like it is respectively small in height which would be perfect for the single bay of my triple. I emailed the guy who was selling the Viper pictured, but he never responded.

Thanks ZR1 friends

What is the height of your cars and the ceiling height on your garage? I have less than 10' and I can put any of my vette on the top and my Riviera on the bottom with room to spare.

[Alberta_ZR1]

Originally Posted by cvette98pacecar

What is the height of your cars and the ceiling height on your garage? I have less than 10' and I can put any of my vette on the top and my Riviera on the bottom with room to spare.

What is the column height of your hoist, 4-post I'm assuming?

[Alberta_ZR1]

The overall garage is 22x28. There is a single bay on the one side of the double door that I'm planning to use to stack the Vette's (ZR1 and C6 Z06). The single bay measures 8x22. The only thing I'm not 100% on is the ceiling height. It's a new-to-me house that I take possession of in August. Sadly there were 15 foot ceilings, but the previous owner considered it wasted space and build a really nice mezzanine that runs along the top now. I believe that there is now 8-10'' of space between the floor and the mez.

Appreciate the feedback and assistance.

[WARP TEN]

Originally Posted by Alberta_ZR1

The overall garage is 22x28. There is a single bay on the one side of the double door that I'm planning to use to stack the Vette's (ZR1 and C6 Z06). The single bay measures 8x22. The only thing I'm not 100% on is the ceiling height. It's a new-to-me house that I take possession of in August. Sadly there were 15 foot ceilings, but the previous owner considered it wasted space and build a really nice mezzanine that runs along the top now. I believe that there is now 8-10'' of space between the floor and the mez.

Appreciate the feedback and assistance.

Hey Tyler--
After a lot of research I got a Direct Lift Pro Park 8S last summer to hold my Z and a BMW 5 series. I have ten feet of height and my interior dimensions are 21' x 21'. Raised the garage tracks and installed a jackshaft opener. There are pictures of it in my albums section if you click on my avatar. Let me know if you have any questions about it after you look at them. - Bob

[DaveK]

This place has a "will it fit" calculator that may help.

http://directlift.ca/pp8-calculator.htm

Dave

[Franke]

Alberta,

I use a bend pak 4 post lift with 9000 lbs cap. I have a 64 chevelle ss cvt on top with the ZR-1 underneath. BP posts are 7 ft tall and the ceiling is 9 1/2 ft tall. Works well.