Clutch slave

[laboss3]

Hi does anyone know who sells a steel clutch slave cylinder replacement. All I can find is the cast model I would rather have the steel one and not the cast one. Or possibly a rebuild kit would do also. It's for a 1990 zr1.

Any help would be appreciated

Bob

[LGAFF]

http://powertorquesystems.com/

[scottfab]

http://www.rockauto.com/catalog/more...272&cc=1041275

and also

http://www.rockauto.com/catalog/more...431&cc=1041275

[laboss3]

Thanks guys I have a call into zf doc if he can't help I will try Powertorque Systems. I tried rock auto but they didn't know what they had cast or steel didn't get a warm feeling. Too bad I have used them in the past but the tech couldn't take a look to see what he had in stock.

Bob

[scottfab]

Originally Posted by laboss3

Thanks guys I have a call into zf doc if he can't help I will try Powertorque Systems. I tried rock auto but they didn't know what they had cast or steel didn't get a warm feeling. Too bad I have used them in the past but the tech couldn't take a look to see what he had in stock.

Bob

Rockauto has both cast and steel. They list about 6 or 8 that fit the 90.
The links I sent are the two steel ones going by the pics. The others were obviously cast going by the pics.
When I replaced mine I used a cast part.

[vettn71]

Jim at PowerTorque rebuilt my master and slave. Only way to go, as many of the new units may be misassembled. I had the cast units in my Z while I waited to get the originals rebuilt and they just don't feel the same. Call Jim. He's a great guy to work with

Jim

[efnfast]

Originally Posted by LGAFF

http://powertorquesystems.com/

2nd'd