|
|
|
05-11-2013
|
#1 |
 Join Date: May 2013
Location: Beaver, PA
Posts: 516
|
Fuel injectors
I need to replace my fuel injectors on the Z. Does anyone know where i can get new ones and what part numbers they are. I intend to replace all 16 of them.
Thanks in advance. |
|
|
|
05-11-2013
|
#2 |
|
Join Date: Jun 2012
Location: PA
Posts: 772
|
Re: Fuel injectors
Call FIC, http://www.fuelinjectorconnection.com/. I believe if your a member you get a discount. Call Jerry for the gaskets http://jerrysgaskets.com/store2/root/. They'll know what you need.
__________________
Joe 1990 Bright Red ZR-1 #2599 |
|
|
|
|
05-11-2013
|
#3 |
|
Join Date: May 2013
Location: Beaver, PA
Posts: 516
|
Re: Fuel injectors
Thanks Joe. I will do that.
|
|
|
|
|
05-11-2013
|
#4 |
Join Date: Aug 2005
Location: Scottsdale, AZ
Posts: 2,452
|
Re: Fuel injectors
I would get stainless & not rebuilt, do it 1 time
|
|
|
|
|
05-12-2013
|
#5 | |
 
Join Date: Dec 2004
Location: Jacksonville, FL USA
Posts: 4,645
|
Re: Fuel injectors
Quote:
 Tom
__________________
1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member |
|
|
|
|
|
05-12-2013
|
#6 |
|
Join Date: May 2013
Location: Beaver, PA
Posts: 516
|
Re: Fuel injectors
I agree with you all. I only want to do this once.
|
|
|
|
|
05-12-2013
|
#7 |
Join Date: Mar 2004
Location: Found Member
Posts: 4,346
|
Re: Fuel injectors
You may want to check out Marc Haibeck's site , for his DVD on the plenum pull.
http://www.zr1specialist.com/HAT%20W...enum%20dvd.htm
__________________
Frank Urbo. NCM Lifetime member # 982 Registry Founding # 237 |
|
|
|
|
05-12-2013
|
#8 |
 
Join Date: Jan 2009
Location: Portland Oregon metro area (Washington side)
Posts: 3,207
|
Re: Fuel injectors
I researched this when I bought mine and bought the best.
RC Lucas injectors are stainless steal AND flow matched to within 1%. Also they are a rotor design not pintle I took a tour of their facility and bought all 16 injectors on the spot. http://www.rceng.com/faq.aspx This is a quote from their site: "Vette Magazine, the top monthly publication read by Corvette enthusiasts, recently built a 1995 ZR-1 project vehicle, billed as the ultimate street-legal, touring car. Vette selected RC Engineering injectors."
__________________
Scott  Vett owner since 1979._It's about the car and the people |
|
|
|
|
05-13-2013
|
#9 | |
|
Join Date: Dec 2012
Location: NC
Posts: 1,786
|
Re: Fuel injectors
Quote:
Maybe electrical pulse opens valve to allow fuel to impeller??? Is there an exploded schematic for these?
__________________
I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG] |
|
|
|
|
|
05-13-2013
|
#10 | |
|
Join Date: Jan 2009
Location: Portland Oregon metro area (Washington side)
Posts: 3,207
|
Re: Fuel injectors
Quote:
__________________
Scott Vett owner since 1979._It's about the car and the people |
|
|
|
|
 |
|
|
Hybrid Mode
