Block learn?s - ZR-1 Net Registry Forums

golfz · 06-24-2006

I'mused to dealing with jets and idle and high speed airbleeds. Got this scanner@ idle L-115 R-116 @ cr4uize 1800rpm L-118 R-129. Do i have a problem/ help me learn . Thanx

tomtom72 · 06-24-2006

I'm not fluent in Electronic Engine Control speak yet

There is a page in the FSM, in the 90 manual it's in section 6E, under Driveability and Emissions & it shows a snap shot of a scan of an LT5 at idle and in "closed loop" operation. In the beginning of the section it gives definitions for all the terms...like Block Learn, cross count, etc. On page 9 of this section, Tech postings in our forum there is a thread I started where I asked for help with my scan tool data....you may want to check it out...it's about 1/2 way down the page.

Tom

06-24-2006	#1
golfz Join Date: Jun 2006 Location: owens valley ca. Posts: 11	Block learn?s I'mused to dealing with jets and idle and high speed airbleeds. Got this scanner@ idle L-115 R-116 @ cr4uize 1800rpm L-118 R-129. Do i have a problem/ help me learn . Thanx

06-24-2006	#2
tomtom72 Join Date: Dec 2004 Location: Jacksonville, FL USA Posts: 4,645	Re: Block learn?s I'm not fluent in Electronic Engine Control speak yet There is a page in the FSM, in the 90 manual it's in section 6E, under Driveability and Emissions & it shows a snap shot of a scan of an LT5 at idle and in "closed loop" operation. In the beginning of the section it gives definitions for all the terms...like Block Learn, cross count, etc. On page 9 of this section, Tech postings in our forum there is a thread I started where I asked for help with my scan tool data....you may want to check it out...it's about 1/2 way down the page. Tom __________________ 1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member