|
![]() |
#1 |
![]() Join Date: Aug 2012
Location: Louisiana
Posts: 74
|
![]()
My car runs pretty good and it idles down low where it should, but its ever so faint, you can hear a miss every now and again. It idles a tad bit erratic, not that its major, but enough to make me want to figure out what it is. It also has a slight hesitation from idle to when I give it some gas. If it's idled up it don't have this hesitation. It's almost like theres not enough gas available. I am going to start going through the ignition system bit by bit. First I will change the plugs, if it persists, test coil packs and wires. I got this car about 1000k miles ago and not sure when this stuff was changed last (if ever). It has 70k miles on the whole car, but the engine had about 35k on it when LPE did its thing to it, but that did not include altering the ignition system. Any tips, anything else I should check out?
|
![]() |
![]() |
![]() |
#2 |
![]() ![]() Join Date: Jun 2005
Location: pittsburgh
Posts: 4,624
|
![]()
a "slight miss" being felt is a major miss being absorbed by the DM flywheel if you still have it. injectors, plugs are a good place to start. pull the plugs and see how they look
__________________
It's not the car, it's the people - Doug Johnson 90 r/r "KEYS ON" nick named "T.L.B" |
![]() |
![]() |
![]() |
#3 | |
![]() Join Date: Aug 2012
Location: Louisiana
Posts: 74
|
![]() Quote:
And as for the work, 35k miles ago LPE tore it down and ported the heads, intake, bored it to a 368, put new rods ans 12:1 pistons in it. "Chipped" it to match the new setup. No cam change, no headers. I have been trying to get it to run like it should since I got it, and it runs awesome right now, but this little miss needs attention. |
|
![]() |
![]() |
![]() |
#4 |
Banned
BANNED
Join Date: Oct 2006
Location: MD
Posts: 3,674
|
![]()
Details help
When work was done and what was done in the past Likely the typical: Fuel injectors Coil packs Spark plugs and wires Check with daniel in Louisiana (he has done these changes a few times) ![]() David |
![]() |
![]() |
![]() |
#5 |
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,682
|
![]()
Did this start when LPE did their "thing"? What mods did LPE do?
|
![]() |
![]() |
![]() |
#6 |
![]() Join Date: Aug 2012
Location: Louisiana
Posts: 74
|
![]()
Oh I listed the mods earlier in the post. This was done years ago. Its been like this sinfe ive had it.
|
![]() |
![]() |
![]() |
#7 |
Join Date: Aug 2005
Location: Scottsdale, AZ
Posts: 2,446
|
![]() |
![]() |
![]() |
![]() |
#8 |
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,682
|
![]() |
![]() |
![]() |
![]() |
#9 |
![]() Join Date: Jan 2009
Location: Portland Oregon metro area (Washington side)
Posts: 3,193
|
![]()
When was the last time injector cleaner was run though?
Cheap and easy to do compared to coils etc. I run the Techron stuff through once a year on 1/4 tank before bed time in winter.
__________________
Scott ![]() Vett owner since 1979._It's about the car and the people |
![]() |
![]() |
![]() |
#10 |
![]() Join Date: Aug 2012
Location: Louisiana
Posts: 74
|
![]() |
![]() |
![]() |
![]() |
|
|