|
|
|
10-30-2012
|
#1 |
  
Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,904
|
A/O Engineering Forced Air Filler Plate
I took the center cross piece to the mold maker today. I'll need a urethane mold made for this piece. It was injection molded originally.
He is making this mold with the remaining rear bumper molding molds. I'll have front filler plates available soon. Molds and Parts to make in December are as follows..... * A/O Engineering Forced Air Plates DONE (waiting on center cross insert mold) * 49th Street Rockers NEXT * Callaway ZR-1 panels (for my personal ZR-1 needs ONLY - Modifying the kit for my own design) * 1954 Motorama Fastback roof/trunk/door molds ALMOST DONE February 2013 will be a nasty, messy month.....my shop will never be the same. Guys, I admit that I'm slow with this stuff. This is not my area of concentration. This is extra side work for me but I do enjoy providing the parts.
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project Last edited by Blue Flame Restorations; 02-12-2013 at 07:27 PM. |
|
|
|
10-31-2012
|
#2 |
  
Join Date: Aug 2005
Location: Northridge, CA
Posts: 1,461
|
Re: A/O Engineering Forced Air Filler Plate
Wow! These parts will be awesome!
Thanks for keeping the "hobby" alive! 
|
|
|
|
|
02-12-2013
|
#3 |
|
Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,904
|
Re: A/O Engineering Forced Air Filler Plate
Finally getting to do some mold making and deep fiberglass work this month. Here is the Forced Air license filler plate. The orange color is gel coat. The fiberglass matt and resin is applied next. This will happen in a few hours.
The center "cross insert" piece will be cast in a urethane mold. Cost for the Forced Air license filler plate and insert will be $125 plus shipping. 
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project Last edited by Blue Flame Restorations; 02-12-2013 at 04:53 PM. |
|
|
|
|
02-12-2013
|
#4 |
 
Join Date: Jan 2009
Location: Mandeville, LA
Posts: 340
|
Re: A/O Engineering Forced Air Filler Plate
Nice work, Brett! Thanks for all that you do for our hobby!
Jep |
|
|
|
|
02-12-2013
|
#5 |
|
Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,904
|
Re: A/O Engineering Forced Air Filler Plate
Forced Air Mold is done now. Just need to pop it out of the mold and trim it tomorrow. This isn't a glamorous process but it has to be done.
Jep, I enjoy doing the work and supplying the parts when someone wants them. But most people don't understand the planning and work that goes into producing a part. If it was easy, people would do it themsleves. 
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project Last edited by Blue Flame Restorations; 02-12-2013 at 09:39 PM. |
|
|
|
|
02-12-2013
|
#6 |
|
Join Date: Nov 2011
Location: Dunbarton NH
Posts: 7,479
|
Re: A/O Engineering Forced Air Filler Plate
That's an interesting picture Brett, I knew a girl...........
|
|
|
|
|
02-12-2013
|
#7 |
|
Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,904
|
Re: A/O Engineering Forced Air Filler Plate
Center cross insert during the mold maing process.
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project |
|
|
|
|
02-12-2013
|
#8 |
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,679
|
Re: A/O Engineering Forced Air Filler Plate
Brett,i want one without the center cross piece.
Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
|
|
|
|
02-13-2013
|
#9 | |
Join Date: Sep 2012
Location: Rockwall, Tx
Posts: 1,510
|
Re: A/O Engineering Forced Air Filler Plate
Quote:
Brett, what modifications are going to be needed to hook up to our airbox?
__________________
_________________ 1994 AB/Grey #141 430 RWHP/392 RWTQ FBI Lyposuction / Secondaries relieved of duty / SW Long Tube Headers / Corsa Exhaust / FIC SS Injectors / MSD Coils / Lightweight Pulleys / Corey tuned B & M Shifter / Aluminum Flywheel / Samco Hoses / Shelby Series One's / C4 No Flex Frame Stiffener BBC - Bling By Carter: Custom ZR-1 Center Caps / Custom Plenum Plate / Air Box Knobs / TB Cover / Oil Filter Cover |
|
|
|
|
|
02-13-2013
|
#10 | |
|
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,679
|
Re: A/O Engineering Forced Air Filler Plate
Quote:
LMAO thanks for reminding me about the squirrels now i'll have to install wire screen behind it. Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
|
|
|
|
 |
|
|
Hybrid Mode
