92 Lumbar pump

[dredgeguy]

I just purchased a new pump but the 3 hose lengths are not the same as what is on the car. Can I pull the hoses off the old and reattach to the new or will that cause a problem?

[secondchance]

Charlie,

I would disengage existing carefully and reattach to the new pump.

[dredgeguy]

Will try to pry off the rubber hoses and hope they reattach. If I lose my nerve, might wait for next maintenance day and do it under the watchful eyes of WAZOO's who know what they are doing.
If anybody can use the old lumber pump, they are welcome to it.
Also got my Hurst short shifter in the mail.

[Scrrem]

Originally Posted by dredgeguy

Will try to pry off the rubber hoses and hope they reattach. If I lose my nerve, might wait for next maintenance day and do it under the watchful eyes of WAZOO's who know what they are doing.
If anybody can use the old lumber pump, they are welcome to it.
Also got my Hurst short shifter in the mail.

Yeah, Be careful Charlie, I have two seats right now both with broken hose couplers, need to come up with a fix to make them functional again.
Rich

[dredgeguy]

Originally Posted by Scrrem

Yeah, Be careful Charlie, I have two seats right now both with broken hose couplers, need to come up with a fix to make them functional again.
Rich

Rich,
If the parts will do you any good you are welcome to have my old one.

[Scrrem]

Originally Posted by dredgeguy

Rich,
If the parts will do you any good you are welcome to have my old one.

Thanks Charlie,
I just picked up two seats worth of spare parts from Pete, should have them this week. Thanks for the offer.
Rich

[dredgeguy]

Ouch, do not need to go down that road...........

[nelson007]

Hello Charlie,
I have some (bullets) . They are connectors to extend small tubes. I don’t know what sizes I have but I can check later when I get home. Let me know the size tube that is used on the pump. By the way where did you purchase the lumbar pump, the ones in my car don’t work?
Have a good day,

Nelson

[dredgeguy]

Originally Posted by nelson007

Hello Charlie,
I have some (bullets) . They are connectors to extend small tubes. I don’t know what sizes I have but I can check later when I get home. Let me know the size tube that is used on the pump. By the way where did you purchase the lumbar pump, the ones in my car don’t work?
Have a good day,

Nelson

Nelson,
Got the 84-93 sport seat lumbar pump assembly at zip for $144.95
http://www.zip-corvette.com/ProductDetails/ProductDetails.aspx?pid={b59182cc-4658-4916-ad76-605f8b0c6221}&gid={84dc6c8b-f811-46cf-b677-4cbbf8ed0fe1}&GroupName=Sport+Seat+Hardware&pname= 84-93+Sport+Seat+Lumbar+Pump+Assembly&Referer=&Alias= &ptct=SGR-SR&CTitle=&

[dredgeguy]

Success,
WAZOO installed the new lumbar pump and now for the first time, I have been able to enjoy and adjust the lumbar support in my sport seat. Thanks Jim!