|
|
|
12-21-2011
|
#1 |
 Join Date: May 2005
Location: Nichols, FL
Posts: 615
|
Flashing sys
I had always thought the flashing 'sys' was related to a battery dying. When mine started I pulled it and had it checked and it was ok. I cleaned all the grounds (including the fusable resistors) but still get the flashing 'sys'. Any other things to check.
Tyler
__________________
55 Polo White (Project) 61 Jewel Blue (Sold to buy above) 66 Nassau Blue 68 Torch Red 88 ZR1 Blue 90 ZR1 White |
|
|
|
12-21-2011
|
#2 |
 Join Date: Feb 2011
Location: San Marcos CA
Posts: 1,802
|
Re: Flashing sys
I found out (when I rebuilt my steering column) that if the airbag fuse isn't in place, the sys comes up on the digital readout and the car won't start. I thought it was vats related...but anyways, just one other possible check.
|
|
|
|
|
12-22-2011
|
#3 |
|
Join Date: Jun 2005
Location: CenCoast California
Posts: 899
|
Re: Flashing sys
The IP flashes "SYS" when there are CCM codes set.
In the FSM, in the CCM section are instructions on how to get the IP to display CCM codes.
__________________
Hib Halverson Technical Writer former owner 95 VIN 0140 current owner 19 VIN 1878 |
|
|
|
|
12-22-2011
|
#4 |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,160
|
Re: Flashing sys
You still might have an internal short in the battery under load. However a recent change to an Aftermarket Radio system can cause the same message.
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
12-22-2011
|
#5 | |
|
Join Date: Mar 2009
Location: Orlando, FL
Posts: 1,828
|
Re: Flashing sys
Quote:
__________________
2004 Z06/Z16 LeMans Commemorative Edition 1991 ZR-1 #302 White/Gray (sold) 1991 ZR-1 #1147 Red/Saddle (sold) |
|
|
|
|
|
12-22-2011
|
#6 |
|
Join Date: Jul 2011
Location: Ft Myers Fl
Posts: 224
|
Re: Flashing sys
I've noticed that it comes on if someone took out a warning light in the info center, or the bulb burned out.
|
|
|
|
|
12-23-2011
|
#7 |
|
Join Date: Jun 2010
Location: back in lone pine
Posts: 591
|
Re: Flashing sys
leave the bulb in and just break it .i did it to both my cars when i took out the tire inflation sensors off the wheels
|
|
|
|
 |
|
|
Hybrid Mode
