ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 11-02-2011   #1
ZONER 95
 
Join Date: Oct 2011
Location: Massachusetts
Posts: 197
Default Recognize this hose??.....

Found this hose floating around loose in the engine bay of my 95.....its only about 6" long and has a flared end like it would just pop into something......I've looked all over for its home without any luck.....any ideas?......found near windshield wash fluid fill....

__________________
95 ZR-1 #178
Black/Beige
Dunn Heads
ZONER 95 is offline   Reply With Quote
Old 11-02-2011   #2
A26B
 
A26B's Avatar
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,396
Default Re: Recognize this hose??.....

condensate drain tube from A/C evap. look for a hole in the bottom of the housing, near the firewall.
__________________
Jerry Downey
JERRYS LT5 GASKETS & PARTS
http://www.jerrysgaskets.com
1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc.
2016 Black-Red, 3LT-Z51 Auto 8-speed.
A26B is offline   Reply With Quote
Old 11-02-2011   #3
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,160
Default Re: Recognize this hose??.....

Concur. 100%
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)

GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 11-02-2011   #4
ZONER 95
 
Join Date: Oct 2011
Location: Massachusetts
Posts: 197
Default Re: Recognize this hose??.....

Thanks guys...will go check it out
__________________
95 ZR-1 #178
Black/Beige
Dunn Heads
ZONER 95 is offline   Reply With Quote
Old 11-02-2011   #5
VetteVet
 
VetteVet's Avatar
 
Join Date: Jan 2009
Location: Mandeville, LA
Posts: 340
Default Re: Recognize this hose??.....

The flared end should pop into a hole in the lower front of the blower motor housing. The other end should then line up with a nipple on the evaporator case.
VetteVet is offline   Reply With Quote
Old 11-03-2011   #6
ZONER 95
 
Join Date: Oct 2011
Location: Massachusetts
Posts: 197
Default Re: Recognize this hose??.....

Thanks....figured it out and she's back on.....Kevin
__________________
95 ZR-1 #178
Black/Beige
Dunn Heads
ZONER 95 is offline   Reply With Quote
Old 11-05-2011   #7
ZONER 95
 
Join Date: Oct 2011
Location: Massachusetts
Posts: 197
Default Re: Recognize this hose??.....

Quote:
Originally Posted by VetteVet View Post
The flared end should pop into a hole in the lower front of the blower motor housing. The other end should then line up with a nipple on the evaporator case.

This is where it fit......thanks
__________________
95 ZR-1 #178
Black/Beige
Dunn Heads
ZONER 95 is offline   Reply With Quote
Old 11-05-2011   #8
Corbusa
 
Join Date: Sep 2011
Location: TN
Posts: 581
Default Re: Recognize this hose??.....

Is there some way to make sure it doesnt fall off again ? I'd hate to lose it while driving.
Corbusa is offline   Reply With Quote
Old 11-05-2011   #9
ZONER 95
 
Join Date: Oct 2011
Location: Massachusetts
Posts: 197
Default Re: Recognize this hose??.....

Now that its back on it seems pretty snug.....I don't think it will fall off but will be checking it periodiclly.
__________________
95 ZR-1 #178
Black/Beige
Dunn Heads
ZONER 95 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:02 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020