|
|
|
10-23-2011
|
#1 |
 Join Date: Dec 2003
Posts: 477
|
Sport Seats parts
I am rebuilding a set of sport seats for the car. Anyone with some extra partsaround? I broke one of the little tube connectors. About the size of a nickel.
Thanks in advance, George |
|
|
|
10-24-2011
|
#2 | |
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
|
Re: Sport Seats parts
Quote:
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
|
|
10-25-2011
|
#3 |
|
Join Date: Dec 2003
Posts: 477
|
Re: Sport Seats parts
Started with the lumbar support. Original plastic bags totally deteriorated. Of course, since I tend to over engineer everything, built batters from bicycle rubber tubes, then sewed up the fabric bags to hold them. .
What I can use is the little black connector at the end of the three colored tubes. This is what I am looking for. The company that made the system originally is out of business. Thanks, George |
|
|
|
|
10-25-2011
|
#4 |
|
Join Date: Oct 2008
Location: Colleyville, TX
Posts: 272
|
Re: Sport Seats parts
Just bought all the vacuum connectors through Ecklers. About $9each
Jim |
|
|
|
|
10-25-2011
|
#5 | |
  
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Sport Seats parts
Quote:
George what you may call "over engineering" I see as a damn fine quality repair. Nice work there. 
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
10-25-2011
|
#6 |
|
Join Date: Dec 2003
Posts: 477
|
Re: Sport Seats parts
Thanks, just what I need, and it looks like Eckler’s is the only source. I also need the little rubber thing shown in the attached photo. 4 of them total. I was not looking forward to making such a small part. The originals are all shot to hell.
The new lumbar supports are about $80 to $110 per side. A lot of coin for what you get. I also fixed the pump. Replaced the diaphragm. Gold. I just took all the stuff and did it in the family room. Reverse calculated the right size bicycle tube. Sports Chalet. Needed 2 at $6.00 each. Little bottle of adhesive at $25 from Granger for about the same size (and cost) as my wife’s fingernail polish.) Made a pattern and marked up the fabric from Joann’s Fabric. $5.00 for fabric. Had the drycleaner stitch it up for me. $22.00 and a smile when I told her what it was for. And as the say, priceless, well not quite priceless, but it is what I enjoy. Will post a photo when I get a little further (or is it farther?) along. George |
|
|
|
|
10-25-2011
|
#7 | |
|
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Sport Seats parts
Quote:
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
10-26-2011
|
#8 | |
Join Date: Dec 2005
Location: Delanson, NY
Posts: 916
|
Re: Sport Seats parts
Quote:
I purchased both of the connector parts frm a guy in Florida (I think). I'll try to find his info and post up. Nice job on the bladders. 
__________________
1968 convertible Lemans Blue, 1986 coupe Medium Blue NCRS Top Flight (sold), 1990 ZR1 #2529 Red NCRS Regional and National Top Flight (sold), 1990 ZR1 #2124 Charcoal Metallic NCRS Top Flight 2010 & 2018, 2003 Anniversary Red Convertible (sold) |
|
|
|
|
|
10-25-2011
|
#9 |
|
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
|
Re: Sport Seats parts
Sorry George, I have had no time to look for the parts..
I know I might have some of them
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
|
10-26-2011
|
#10 |
|
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
|
Re: Sport Seats parts
So what Size inner tube did you use? Also what is the PN for the Adhesive, I need to do the Driver side Lumbar in my 90, this would be a great repair
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
 |
|
|
Hybrid Mode
