|
![]() |
#1 |
![]() Join Date: Aug 2008
Location: Houston, TX
Posts: 2,319
|
![]()
This is probably why I've had dash light disco instead of beach blanket bingo.
![]() ![]() Man that connector crumbled like king tuts underwear. Seems like 80% of the time the Oriellys right down the street has everything I need. So it was time to install a new plug. ![]() Just like factory new now. ![]() I was hoping to be close to done tonight until I had to take car of the alternator plug. Oh well. |
![]() |
![]() |
![]() |
#2 |
![]() Join Date: Sep 2011
Location: montgomery tx
Posts: 65
|
![]()
I have had to replace that too while you are there might as well check alt and replace belt and tensioner. these items tend not to enjoy high revolutions. And these parts are fairly inexpensive. I would at least test the altenator and make sure you did not damage a diode.
![]()
__________________
[B]"the winner ain't the one with the fastest car its the one who refuses to lose" - Dale Earnhardt :saluting: |
![]() |
![]() |
![]() |
#3 |
Join Date: Jun 2009
Location: I live at Devens, one run at a time
Posts: 455
|
![]()
Hoping that's heat-shrink tape and not just electrical tape (which tends to degrade with time/temp).
Humbly suggest that those splices sure look like good spot for some good old fashioned tin-lead solder. Also betting I should take a look at ours - another point to inspect... Best of luck, - Jeff
__________________
[I]91 ZR-1 #1840, autocrossing in SCCA BSP. FIC S/S's DRM chip/Watson/Borla/lid/LW batt&headlights, springs, shocks, pads & lines, quick rack & Turn One, camber brace, 32/22mm sways, A/C halfway deleted 17x11 & 12 CCW's, 315 & 335 Hoosier A6s [/I] |
![]() |
![]() |
![]() |
#4 |
![]() Join Date: Aug 2008
Location: Houston, TX
Posts: 2,319
|
![]()
Nope just electrical tape. Wraped each wire then wraped all three together and stuffed them back in the main. I'm not worried about it because honestly at some point that whole wire harness is gonna have to be replaced. All those wires in the loom are as hard as a rock and just plain wore out. The engine compartment is a harsh enviornment for wires. The wire harnesess everywhere else are in great shape. But that one that the alternator plug comes out of sits in a part of the engine thats exposed to the most heat.
|
![]() |
![]() |
![]() |
#5 |
![]() ![]() Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,906
|
![]()
Heat shrink is a quick and easy thing to do. Better safe than sorry. JMO
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project |
![]() |
![]() |
![]() |
#6 | |
![]() ![]() ![]() Join Date: May 2007
Location: Peoria, AZ
Posts: 9,147
|
![]() Quote:
Concur and King Tut would approve ![]()
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director ![]() 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
![]() |
![]() |
![]() |
|
|