Dual Mass and clutch disk - ZR-1 Net Registry Forums

Polo-1 · 06-19-2011

Jim got the 402 today.

I gave him first choice on flywheels and clutches.

I have a NEW GM dual mass flywheel $ 350

New Randy Woods C/C Ceramic Disk $200

1990 415 · 06-20-2011

Congrats to Jim on the new addition to the family.

GOLDCYLON · 06-20-2011

Kevin is the RW disc a spring hub?

Polo-1 · 06-20-2011

Yea you could not knock the smile off Jim's face Saturday. His first time looking at it finished.

Daryll
As I remember it from Randy, It's made to work for both DM or solid. I would shoot him a email to make sure. I know he said they tried many brands and wound up making their own.

http://www.zr1products.com

New not reman. Never bolted to a motor. These were $1600 from GM when you could buy them new.

These units feature an elongated solid hub for greater spline contact and incorporate a sandwiched marcel drive plate (spring) to "cushion" the controlled lock-up design of the OEM hydraulic system, resulting in improved shifts.

Also found a EGR for 93-95

QB93Z · 06-24-2011

If it is still available, I will take the DM flywheel for $350. PM Sent

Jim

Polo-1 · 06-24-2011

pm'ed you back

zrss · 06-25-2011

I didn't notice this thread when Kevin first posted it or I would have responded earlier. Kevin is a first class guy. When I picked up the 402 last Saturday, Kevin threw in lots of free parts that were not part of the engine purchase. Assembly oil, master cylinder, lenses, extra hoses, used pressure plate with good throwout bearing, and much more, all at no charge. Anyone interested in doing busines with Kevin can do so knowing he's a class act.

ZZZZZR1 · 06-25-2011

Quote:

Originally Posted by zrss

I didn't notice this thread when Kevin first posted it or I would have responded earlier. Kevin is a first class guy. When I picked up the 402 last Saturday, Kevin threw in lots of free parts that were not part of the engine purchase. Assembly oil, master cylinder, lenses, extra hoses, used pressure plate with good throwout bearing, and much more, all at no charge. Anyone interested in doing busines with Kevin can do so knowing he's a class act.

Jim,

Couldn't agree more. Kevin is a class act and one you don't find often.....

David

Polo-1 · 06-26-2011

Thanks Guys

Jim, With you showing up a day early it through me off. I still have stuff in the rafters and barn. I was going to fill the bed of your truck... I have a cross-brace, exhaust, still more stuff to pull out.. Most of it is just too big to ship.
Too much bs'n and not enough loading...

06-19-2011	#1
Polo-1 Join Date: Sep 2005 Location: Washington Posts: 956	Dual Mass and clutch disk Jim got the 402 today. I gave him first choice on flywheels and clutches. I have a NEW GM dual mass flywheel $ 350 New Randy Woods C/C Ceramic Disk $200

06-20-2011	#2
1990 415 Join Date: Feb 2009 Location: Canada Posts: 309	Re: Dual Mass and clutch disk Congrats to Jim on the new addition to the family.

06-20-2011	#3
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,120	Re: Dual Mass and clutch disk Kevin is the RW disc a spring hub? __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

06-20-2011	#4
Polo-1 Join Date: Sep 2005 Location: Washington Posts: 956	Re: Dual Mass and clutch disk Yea you could not knock the smile off Jim's face Saturday. His first time looking at it finished. Daryll As I remember it from Randy, It's made to work for both DM or solid. I would shoot him a email to make sure. I know he said they tried many brands and wound up making their own. http://www.zr1products.com New not reman. Never bolted to a motor. These were $1600 from GM when you could buy them new. These units feature an elongated solid hub for greater spline contact and incorporate a sandwiched marcel drive plate (spring) to "cushion" the controlled lock-up design of the OEM hydraulic system, resulting in improved shifts. Also found a EGR for 93-95 Last edited by Polo-1; 06-21-2011 at 09:02 PM. Reason: info from Randy

06-24-2011	#5
QB93Z Join Date: May 2007 Location: Westminster, Maryland Posts: 3,684	Re: Dual Mass and clutch disk If it is still available, I will take the DM flywheel for $350. PM Sent Jim

06-24-2011	#6
Polo-1 Join Date: Sep 2005 Location: Washington Posts: 956	Re: Dual Mass and clutch disk pm'ed you back

06-25-2011	#7
zrss Join Date: Dec 2006 Location: Montana Posts: 64	Re: Dual Mass and clutch disk I didn't notice this thread when Kevin first posted it or I would have responded earlier. Kevin is a first class guy. When I picked up the 402 last Saturday, Kevin threw in lots of free parts that were not part of the engine purchase. Assembly oil, master cylinder, lenses, extra hoses, used pressure plate with good throwout bearing, and much more, all at no charge. Anyone interested in doing busines with Kevin can do so knowing he's a class act.

06-26-2011	#9
Polo-1 Join Date: Sep 2005 Location: Washington Posts: 956	Re: Dual Mass and clutch disk Thanks Guys Jim, With you showing up a day early it through me off. I still have stuff in the rafters and barn. I was going to fill the bed of your truck... I have a cross-brace, exhaust, still more stuff to pull out.. Most of it is just too big to ship. Too much bs'n and not enough loading...