ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 06-03-2011   #1
aafc
 
aafc's Avatar
 
Join Date: Feb 2010
Location: Summerfield, FL
Posts: 426
Default help with rear springs codes

Hi,

I posted this request on the other site (C4 and Zr-1) looking for information on 1994-and 1995 Zr-1's rear springs. On the 1984-1996
suspension chart the 1994 and 1995 ZR-1's show the same front 75.5 Nm
and rear 33.0 Nm, but there is no codes (2 or 3 digit )cross ref chart.

If anyone who has access to build sheet for the two cars can you let me know what you show in the space front and rear spring are on the build sheet.
A corvette parts place has springs but they are in a pile and they don't know what year they came from, that's why I need the codes.

Thank You
John Becker netregistry member #0115
black/white 1990 # 2546
one of a few auto (4l8oe) eq ZR-1's
aafc is offline   Reply With Quote
Old 06-06-2011   #2
Marc Haibeck
 
Join Date: May 2007
Location: Addison IL
Posts: 250
Default Re: help with rear springs codes

John,

I have found that the factory spring codes in the GM parts listing are sometimes wrong, in so far as they don?t match what the car was built with. Because of that I have been recording the spring codes for ZR-1?s that have a known history. That is, original owner cars.

I have observed that several of each year ?92 to ?95 ZR-1?s all were built with rear spring RHY.
Marc Haibeck is offline   Reply With Quote
Old 06-06-2011   #3
mike100
 
Join Date: Feb 2011
Location: San Marcos CA
Posts: 1,786
Default Re: help with rear springs codes

For some reason I have an aftermarket rear spring on mine. Did any other models have the RHY rear spring. Are they hard to find? what about 91 cars?
mike100 is offline   Reply With Quote
Old 06-06-2011   #4
aafc
 
aafc's Avatar
 
Join Date: Feb 2010
Location: Summerfield, FL
Posts: 426
Default Re: help with rear springs codes

Marc,
My ZR-1 is a 1990 #2546,and i have the build sheet. ON it it shows that the front
spring is code AA and the rear spring is code NYR.I known the rear spring code is correct
because i have removed it to service the rear.After 20 years and 112xxx miles the posi went out.So as long as the rear came out for service i' ll rpl the stock gears 3.45 with 3.73 and install a lighter spring 228 lbs(new). that way i'll the spring i want.
I also was told not to use an old spring as it could crack because of (age ,weak or not as strong ).

thanks
John Becker member #0115
1990 white/black #2546
one of a few auto (4l80e) eq ZR-1's
aafc is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:39 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025