Miscellaneous Parts--BG - ZR-1 Net Registry Forums

Demps · 05-08-2011

I have a few parts that I am not using. If anyone is interested I can bring to BG.

1) SLP "Claw" Air Intake. Powder-coated or painted gray. Appears to be near new. It was on my dark red car when I bought it. I took it off before driving it. The previous owner installed it and claimed near zero miles (it looks like it). $250

2) Cross (harness) bar. Leather wrapped. Mounts on seat belt attachment bolts. $275

3) Glass top. From 90 #618. Appears bronze. Weather strip looks good but back wx strip retaining screw is rusty. Top is original frame. Don't know about the glass but it is very good condition. $400

Not a huge seller--more of a buyer. If someone needs/wants any of these let me know.

Ted

crossfire · 05-10-2011

Hey Ted, I'm interested in the SLP Claw and clear top. I'll PM you for details.

Lance

batchman · 05-11-2011

Obviously Lance has it but I'm curious if you can tell what the Claw is made out of, and for a racer's curiousity, "What's it weigh?"

I've thought for a while it'd worth a try to land one and see if made power versus a flat filter/open lid. But if it's heavy, being high and up front, that'd make a 1320 guy's part as opposed to a corner carver.

Best,
- Jeff

05-08-2011	#1
Demps Join Date: Jan 2006 Location: Niceville Posts: 998	Miscellaneous Parts--BG I have a few parts that I am not using. If anyone is interested I can bring to BG. 1) SLP "Claw" Air Intake. Powder-coated or painted gray. Appears to be near new. It was on my dark red car when I bought it. I took it off before driving it. The previous owner installed it and claimed near zero miles (it looks like it). $250 2) Cross (harness) bar. Leather wrapped. Mounts on seat belt attachment bolts. $275 3) Glass top. From 90 #618. Appears bronze. Weather strip looks good but back wx strip retaining screw is rusty. Top is original frame. Don't know about the glass but it is very good condition. $400 Not a huge seller--more of a buyer. If someone needs/wants any of these let me know. Ted

05-10-2011	#2
crossfire Join Date: Feb 2008 Location: Tucson, Arizona Posts: 43	Re: Miscellaneous Parts--BG Hey Ted, I'm interested in the SLP Claw and clear top. I'll PM you for details. Lance

05-11-2011	#3
batchman Join Date: Jun 2009 Location: I live at Devens, one run at a time Posts: 455	Re: Miscellaneous Parts--BG Obviously Lance has it but I'm curious if you can tell what the Claw is made out of, and for a racer's curiousity, "What's it weigh?" I've thought for a while it'd worth a try to land one and see if made power versus a flat filter/open lid. But if it's heavy, being high and up front, that'd make a 1320 guy's part as opposed to a corner carver. Best, - Jeff __________________ [I]91 ZR-1 #1840, autocrossing in SCCA BSP. FIC S/S's DRM chip/Watson/Borla/lid/LW batt&headlights, springs, shocks, pads & lines, quick rack & Turn One, camber brace, 32/22mm sways, A/C halfway deleted 17x11 & 12 CCW's, 315 & 335 Hoosier A6s [/I] Last edited by batchman; 05-11-2011 at 01:13 PM. Reason: clarity