ECM # Question - ZR-1 Net Registry Forums

Pete90970 · 02-28-2011

Comprehensive testing by two reliable sources ('Vette shop patronized for almost 10 years and a consultant in automotive scan tools) have indicated that I should replace (or possibly rehab my ECM). I am not ECM literate and have not yet acted on this recommmendation, but the snow's melting and days are warming....

If I choose to replace, how critical is it to match the numbers on my current ECM? (the "Serv. # is 01228331", and the "Part # (bottom line) is 16148441". I have not been able to match the part # on any of the websites I have checked so far, and hesitate to just pick one labeled "ZR-1".

It also appears that sending mine out for analyzing and repair is also somewhat of a crap-shoot. I would appreciate name/contact info. for any source you have found reliable. Thanks.

Pete K.

-=Jeff=- · 02-28-2011

Jep how are you going to exercise the ECM? I might be able to write the program you need to exercise the ECM

XfireZ51 · 02-28-2011

The service ECM is the substitute for previous ECMs but not vice versa. What exactly is happening with the ECM? Any chance you could swap in someone else's?

tomtom72 · 03-01-2011

The only thing I am able to bring to this is a promise that IF I get my ECM back from the west coast any time soon I will lend it to you.

My spare ECM is configured for a 90 ZR-1, but if yours is a later car we can swap EPROM's and put my spare ECM in your car. I have a scanner with software & can bring that along also. The only thing I'm not certain of is what is your model yr because my software stops at 92 or 93....I'll go look at my software pkg & post up.

Tom

limey · 03-01-2011

I have rebuilt ECM's in stock for immediate shipment, 12 month warranty too.

http://www.whiteracingproducts.com/i...roducts_id=174

01228331 & 16163993 are interchangeable.

If you want, you can also send us your ECM, i'll have it tested & IF it's good $100.00 is the test charge, takes 2 weeks to get back If it's bad, then it will be rebuilt.

ittlfly · 03-01-2011

Quote:

Originally Posted by limey

I have rebuilt ECM's in stock for immediate shipment, 12 month warranty too.

http://www.whiteracingproducts.com/i...roducts_id=174

01228331 & 16163993 are interchangeable.

If you want, you can also send us your ECM, i'll have it tested & IF it's good $100.00 is the test charge, takes 2 weeks to get back If it's bad, then it will be rebuilt.

Not to clutter up the post but what about 94-95 ECM's? Are you rebuilding these also? My 94 # 16201461

TFENT · 03-02-2011

Quote:

Originally Posted by tomtom72

The only thing I am able to bring to this is a promise that IF I get my ECM back from the west coast any time soon I will lend it to you.

My spare ECM is configured for a 90 ZR-1, but if yours is a later car we can swap EPROM's and put my spare ECM in your car. I have a scanner with software & can bring that along also. The only thing I'm not certain of is what is your model yr because my software stops at 92 or 93....I'll go look at my software pkg & post up.

Tom

I heard that!! Tell me where to send it and it's in the mail.

tomtom72 · 03-02-2011

Quote:

Originally Posted by TFENT

I heard that!! Tell me where to send it and it's in the mail.

Tom that was not a dig at you. I do hope you didn't take it that way? I just wanted to explain that if you got your situation squared away that this other brother would be next on line if no one else had a spare to help this brother out.

Is your okay? Did the rebuild effort pan out?

Thomas Del Guidice
415 Gramatan Ave. Apt. 1-A
Mount Vernon, NY 10552

Kurt, you be DA MAN! I'll go get a money order and send it with my ECM. Just give me a shipping addy, and to whom to make the money order out to.
It would be nice to get my OE fixed.

Tom

-=Jeff=- · 03-01-2011

what is the cost for the rebuild if we send you an ECM. what is the turnaround time

limey · 03-01-2011

Jeff,

I can rebuild your ecm for $350.00 + $15.00 shipping. 2 weeks

02-28-2011	#1
Pete90970 Join Date: Jul 2005 Location: Durham, Connecticut, USA Posts: 10	ECM # Question Comprehensive testing by two reliable sources ('Vette shop patronized for almost 10 years and a consultant in automotive scan tools) have indicated that I should replace (or possibly rehab my ECM). I am not ECM literate and have not yet acted on this recommmendation, but the snow's melting and days are warming.... If I choose to replace, how critical is it to match the numbers on my current ECM? (the "Serv. # is 01228331", and the "Part # (bottom line) is 16148441". I have not been able to match the part # on any of the websites I have checked so far, and hesitate to just pick one labeled "ZR-1". It also appears that sending mine out for analyzing and repair is also somewhat of a crap-shoot. I would appreciate name/contact info. for any source you have found reliable. Thanks. Pete K.

02-28-2011	#2
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,155	Re: ECM # Question Jep how are you going to exercise the ECM? I might be able to write the program you need to exercise the ECM __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978

02-28-2011	#3
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,682	Re: ECM # Question The service ECM is the substitute for previous ECMs but not vice versa. What exactly is happening with the ECM? Any chance you could swap in someone else's? Last edited by XfireZ51; 02-28-2011 at 11:41 PM.

03-01-2011	#4
tomtom72 Join Date: Dec 2004 Location: Jacksonville, FL USA Posts: 4,609	Re: ECM # Question The only thing I am able to bring to this is a promise that IF I get my ECM back from the west coast any time soon I will lend it to you. My spare ECM is configured for a 90 ZR-1, but if yours is a later car we can swap EPROM's and put my spare ECM in your car. I have a scanner with software & can bring that along also. The only thing I'm not certain of is what is your model yr because my software stops at 92 or 93....I'll go look at my software pkg & post up. Tom __________________ 1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member

03-01-2011	#5
limey Join Date: Oct 2008 Location: tampa Posts: 537	Re: ECM # Question I have rebuilt ECM's in stock for immediate shipment, 12 month warranty too. http://www.whiteracingproducts.com/i...roducts_id=174 01228331 & 16163993 are interchangeable. If you want, you can also send us your ECM, i'll have it tested & IF it's good $100.00 is the test charge, takes 2 weeks to get back If it's bad, then it will be rebuilt.

03-01-2011	#9
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,155	Re: ECM # Question what is the cost for the rebuild if we send you an ECM. what is the turnaround time __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978

03-01-2011	#10
limey Join Date: Oct 2008 Location: tampa Posts: 537	Re: ECM # Question Jeff, I can rebuild your ecm for $350.00 + $15.00 shipping. 2 weeks