Header install this Saturday - ZR-1 Net Registry Forums

ZZZZZR1 · 02-28-2011

hey Wazoo,

Last minute install this saturday @ George Braml's home in Kingsville, MD (near White Marsh off 95).

Anyone interested I can PM them address and or directions.

We will start early (9am)

Looking forward to another Wazoo Maintenance day!

David

ZR1@gmx.com · 02-28-2011

Hey Dave, I would love to join you guys but the car is in the shop!

If you could shoot any photos and share some tips and tricks it will be greatly appreciated!
Thanks,
Kevin

Scrrem · 02-28-2011

David,
I am still putting mine back together but I could spare a few hours to lend a hand. Shoot me the address.
Rich

secondchance · 03-01-2011

David,

Like I said I will be on the road this Saturday - somewhere between Cleveland and DC.

Rich,
Don't forget to practice Dr. Phil's "teeth and string" trick. After your header install, WAZOO will not accept anything but 32 bolts in the holes.

One method I discussed with Jim is cut the tough to get to holes on the flange in such a way that these bolts, second row from the front, bottom, are screwed in first except for 3/8" or so. With the flange cut, headers can be slipped on followed by the remaining bolts screwed in. This may avoid 2 hours per bolt for these 2 bolts.

Scrrem · 03-01-2011

Quote:

Originally Posted by secondchance

Rich,
Don't forget to practice Dr. Phil's "teeth and string" trick. After your header install, WAZOO will not accept anything but 32 bolts in the holes.

One method I discussed with Jim is cut the tough to get to holes on the flange in such a way that these bolts, second row from the front, bottom, are screwed in first except for 3/8" or so. With the flange cut, headers can be slipped on followed by the remaining bolts screwed in. This may avoid 2 hours per bolt for these 2 bolts.

Yun,You know it. I will also bring along my custom fabricated 8 MM wrench for those tight places.I guess I was so busy running to the parts store, I missed all the fun you and Jim were having on the drivers side.Rich

QB93Z · 03-02-2011

I am sorry that I will not be able to attend. I will be at an antique show in Chantilly VA.

Good Luck George!

Jim

Jagdpanzer · 03-04-2011

Quote:

Originally Posted by secondchance

One method I discussed with Jim is cut the tough to get to holes on the flange in such a way that these bolts, second row from the front, bottom, are screwed in first except for 3/8" or so. With the flange cut, headers can be slipped on followed by the remaining bolts screwed in. This may avoid 2 hours per bolt for these 2 bolts.

Yun,
I like your idea of slotting flange holes out the bottom of the 2 "problem children" bolt locations. Not only would this save a lot time on the install it would also cut a lot of time if you ever had to R&R the headers for any reason.

secondchance · 03-07-2011

I was too tired to focus but when I install mine, I will take a serious look at cutting these flange for those 2 bolts - just have to make sure there is a sufficient room to manuver to slip on. George did not think there was at least for the driver side but I will give another shot st this.

George had a set of OBX headers and I had an opportunity to compare the driver side between the SS and OBX right next to each other. Runners were identical. Collector was shorter on OBX but these come with fake cats so these most likely make up the difference in length to where it mates to the exhaust.

ZZZZZR1 · 03-01-2011

Quote:

Originally Posted by Scrrem

David,
I am still putting mine back together but I could spare a few hours to lend a hand. Shoot me the address.
Rich

PM sent

ZZZZZR1 · 03-01-2011

Quote:

Originally Posted by ZR1@gmx.com

Hey Dave, I would love to join you guys but the car is in the shop!

If you could shoot any photos and share some tips and tricks it will be greatly appreciated!
Thanks,
Kevin

Kevin

Absolutely!!!

David

02-28-2011	#1
ZZZZZR1 Banned BANNED Join Date: Oct 2006 Location: MD Posts: 3,690	Header install this Saturday hey Wazoo, Last minute install this saturday @ George Braml's home in Kingsville, MD (near White Marsh off 95). Anyone interested I can PM them address and or directions. We will start early (9am) Looking forward to another Wazoo Maintenance day! David

02-28-2011	#2
ZR1@gmx.com Join Date: Oct 2010 Location: Sedalia, MO Posts: 150	Re: Header install this Saturday Hey Dave, I would love to join you guys but the car is in the shop! If you could shoot any photos and share some tips and tricks it will be greatly appreciated! Thanks, Kevin __________________ Fun 91 #303

02-28-2011	#3
Scrrem Join Date: Feb 2009 Location: Alexandria, Virginia Posts: 1,467	Re: Header install this Saturday David, I am still putting mine back together but I could spare a few hours to lend a hand. Shoot me the address. Rich __________________ 1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member

03-01-2011	#4
secondchance Join Date: Aug 2006 Location: McLean, VA Posts: 3,723	Re: Header install this Saturday David, Like I said I will be on the road this Saturday - somewhere between Cleveland and DC. Rich, Don't forget to practice Dr. Phil's "teeth and string" trick. After your header install, WAZOO will not accept anything but 32 bolts in the holes. One method I discussed with Jim is cut the tough to get to holes on the flange in such a way that these bolts, second row from the front, bottom, are screwed in first except for 3/8" or so. With the flange cut, headers can be slipped on followed by the remaining bolts screwed in. This may avoid 2 hours per bolt for these 2 bolts.

03-02-2011	#6
QB93Z Join Date: May 2007 Location: Westminster, Maryland Posts: 3,689	Re: Header install this Saturday I am sorry that I will not be able to attend. I will be at an antique show in Chantilly VA. Good Luck George! Jim

03-07-2011	#8
secondchance Join Date: Aug 2006 Location: McLean, VA Posts: 3,723	Re: Header install this Saturday I was too tired to focus but when I install mine, I will take a serious look at cutting these flange for those 2 bolts - just have to make sure there is a sufficient room to manuver to slip on. George did not think there was at least for the driver side but I will give another shot st this. George had a set of OBX headers and I had an opportunity to compare the driver side between the SS and OBX right next to each other. Runners were identical. Collector was shorter on OBX but these come with fake cats so these most likely make up the difference in length to where it mates to the exhaust.