need a part number for the power steering return line - ZR-1 Net Registry Forums

phrogs · 02-26-2011

The one from the cooler to the steering rack.

Soft line going into a hard line clamped ends

tomtom72 · 02-27-2011

90 - 91 P/N 26016988

91 - 95 P/N 26033592

This is from the parts CD that Kurt burnt. The P/N's are old numbers that have proly been changed?

Also, according to the CD you can't get just the hose you reference. It has N/S where the P/N would be, I figure that means No Stock? The numbers I listed are a package with that hose & the clamps & a nut.

I just tried the P/N's @ GM direct and it seems that they are NLA.

ittlfly · 02-27-2011

You might give O' Rielly's or NAPA a call with that part #. They both were able to cross reference it to after market parts stock for me when I was working on another problem.

phrogs · 02-27-2011

humm.

What about the demensions?

Length, outisde and inside diameters?

HAWAIIZR-1 · 02-28-2011

Johnny,

I took mine to a hydraulic hose shop when I could not find the hose and they just cut off the connector and gave me a hose and clamps. They told me it would cost more than worth to make a hose and since low pressure no issue; it was worked fine since. Not the NCRS solution, but works great.

02-26-2011	#1
phrogs Join Date: Jul 2004 Location: Kalamazoo MI Posts: 1,753	need a part number for the power steering return line The one from the cooler to the steering rack. Soft line going into a hard line clamped ends __________________ JOHNNY P Currently own 90 ZR-1 #845 DRM 500 engine package 90 #226 Parts car Hit me up if you need anything.

02-27-2011	#2
tomtom72 Join Date: Dec 2004 Location: Jacksonville, FL USA Posts: 4,645	Re: need a part number for the power steering return line 90 - 91 P/N 26016988 91 - 95 P/N 26033592 This is from the parts CD that Kurt burnt. The P/N's are old numbers that have proly been changed? Also, according to the CD you can't get just the hose you reference. It has N/S where the P/N would be, I figure that means No Stock? The numbers I listed are a package with that hose & the clamps & a nut. I just tried the P/N's @ GM direct and it seems that they are NLA. __________________ 1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member

02-27-2011	#3
ittlfly Join Date: Jul 2009 Location: Redding Calif Posts: 223	Re: need a part number for the power steering return line You might give O' Rielly's or NAPA a call with that part #. They both were able to cross reference it to after market parts stock for me when I was working on another problem. __________________ 1994 ZR-1 # 0102...SOLD

02-27-2011	#4
phrogs Join Date: Jul 2004 Location: Kalamazoo MI Posts: 1,753	Re: need a part number for the power steering return line humm. What about the demensions? Length, outisde and inside diameters? __________________ JOHNNY P Currently own 90 ZR-1 #845 DRM 500 engine package 90 #226 Parts car Hit me up if you need anything.

02-28-2011	#5
HAWAIIZR-1 Join Date: May 2010 Location: Japan Posts: 3,587	Re: need a part number for the power steering return line Johnny, I took mine to a hydraulic hose shop when I could not find the hose and they just cut off the connector and gave me a hose and clamps. They told me it would cost more than worth to make a hose and since low pressure no issue; it was worked fine since. Not the NCRS solution, but works great. __________________ Craig "ZR-1 NO KA 'OI" "ZR-1 ICHIBAN" 1995 #228 Black/Black with Dunn Heads ZR-1 owner since September 2003 ZR-1 Net Registry Founding Member #0074 NCM Lifetime Member #2048