|
|
|
01-30-2011
|
#1 |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
|
Cam cover vent material
Getting ready to put cam covers on. What material do you use for the vent tubes. It looks to be a "scotch-brite" material.
|
|
|
|
01-30-2011
|
#2 |
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
|
Re: Cam cover vent material
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. Last edited by A26B; 05-29-2024 at 03:12 PM. |
|
|
|
|
01-30-2011
|
#3 |
|
Join Date: Mar 2009
Location: Orlando, FL
Posts: 1,828
|
Re: Cam cover vent material
I used scotch-brite, the green stuff. Folded it up on itself a few times and secured with the stock wire.
|
|
|
|
|
01-30-2011
|
#4 |
|
Join Date: Oct 2010
Location: Sedalia, MO
Posts: 150
|
Re: Cam cover vent material
I have some that is about an inch thick, from a floor buffer If any one wants some shoot me your address and I will send you some to cut and use,
I have White, green, red and black. The order is fine to course. ZR1@gmx.com |
|
|
|
|
01-31-2011
|
#5 |
 
Join Date: Aug 2006
Location: Edmonton, Alberta or Phoenix, Arizona
Posts: 2,741
|
Pack it in...
Layer the Scotch-brite & pack in as much as you can. Will breath fine & will help keep oil in the engine.
__________________
There are no limit's mans ingenuity, just as mans ingenuity will never conquer the forces & behavior of this planet...Smokey Y. |
|
|
|
|
06-09-2014
|
#6 |
|
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
|
Re: Cam cover vent material
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. Last edited by A26B; 05-29-2024 at 03:09 PM. |
|
|
|
|
06-09-2014
|
#7 |
Join Date: Aug 2005
Location: Scottsdale, AZ
Posts: 2,452
|
Re: Cam cover vent material
Jerry just keeps the parts coming & our cars going
|
|
|
|
|
06-09-2014
|
#8 | |
|
Join Date: Nov 2007
Location: chicago
Posts: 200
|
Re: Cam cover vent material
Quote:
I use copper brillo/scubber material you can pick it up anywhere,pack as much as you can. Al. |
|
|
|
|
|
06-09-2014
|
#9 |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
|
Re: Cam cover vent material
All,
This is an old thread. Ultimately I replaced the Scotchbrite I originally installed w foam material from Marc Haibeck. Even replacing it in one cam cover was enough to eliminate a persistent oil leak I had when winding the motor beyond 5K.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX |
|
|
|
|
06-10-2014
|
#10 | |
  
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,797
|
Re: Cam cover vent material
Quote:
 Haibeck Cam Cover Filters |
|
|
|
|
 |
|
|
Hybrid Mode
