|
|
|
11-29-2010
|
#1 |
|
Join Date: Nov 2006
Location: Las Vegas, Nevada
Posts: 137
|
pvc hose's and connector
I need most of the rubber associated with rebuilding the system. I'm on pick a part quest but when I'm finished everything underneath should work as new, any leads would be appreciated. I'm looking at a few parts on ebay, a lot already purchased, and the plenum is off and ready to be put back together better than ever. I've taken a lot of pictures!
__________________
[SIGPIC][/SIGPIC] Last edited by lakemeadzmonster; 11-29-2010 at 11:54 PM. Reason: spelling |
|
|
|
11-30-2010
|
#2 |
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
|
Re: pvc hose's and connector
I also have quite a few USED LT5 parts. Any Jerrys Gaskets PN with the letter U in the suffix denotes a used part. Likewise, N denotes a new part.
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
11-30-2010
|
#3 |
|
Join Date: Mar 2009
Location: Orlando, FL
Posts: 1,827
|
Re: pvc hose's and connector
I've got a used vacuum tubing assembly from under my plenum, had no vacuum leaks when removed. No PCV parts, but if you need secondary tubing, I've got it.
|
|
|
|
 |
|
|
Hybrid Mode
