Long T55 - ZR-1 Net Registry Forums

Scrrem · 11-19-2010

Gathering my tools for replacing my rear axle hub bearings. Anyone have a source for a 3/8 drive LONG T55 Torx? Everyone has long shanks up to T50 but not T55.
Rich

secondchance · 11-19-2010

Check w/ Phil. Since we were able to pull mine he must have had one.
Come to thisnk of it, may be we used an extension...

tccrab · 11-19-2010

This long enough?
http://www.sears.com/shc/s/p_10153_1...&blockType=G20

TomC
'Crabs

Jagdpanzer · 11-19-2010

Got both long and short in T55 you are welcome to borrow

Phil

QB93Z · 11-19-2010

I think I used a regular T55 with 3/8 drive extensions to suit.

How about scheduling a MD so some of us can come help/supervise?

Jim

Scrrem · 11-19-2010

Quote:

Originally Posted by QB93Z

I think I used a regular T55 with 3/8 drive extensions to suit.

How about scheduling a MD so some of us can come help/supervise?

Jim

Thanks Phil. Hey Thanks Tom, didn't see that set at Sears and wasn't sure how much clearance there was in that rear knuckle for a shorty. Jim, I will schedule a MV MD once I get the parts. I think I will be doing headers before this job though and I know no one wants to help with that job

Rich

QB93Z · 11-20-2010

I will come help put headers on your car. (If it is scheduled on a day I am not working.)

Are you planning on replacing the suspension bushings when you replace the hub bearings?

Jim

Scrrem · 11-20-2010

Quote:

Originally Posted by QB93Z

I will come help put headers on your car. (If it is scheduled on a day I am not working.)

Are you planning on replacing the suspension bushings when you replace the hub bearings?

Jim

Thanks Jim. I'll schedule is on a day when you and DARRIN can come. I know how he is so looking forward to doing another hearder install

.

Yeah, that's the plan. I was talking to Yun the other day since he has been down this road already.
Rich

Jagdpanzer · 11-20-2010

Good idia Jim
Should be a snap if bring along the WAZZO 12 ton duty bench press

Aurora40 · 11-20-2010

FYI, Advance Auto has a set of Torx that have both long and short from about T10 to T60. They are pretty cheap, though they aren't made here. AmPro is the brand. They've worked fine for me so far. The long ones are about 2" long, not crazy long.

11-19-2010	#1
Scrrem Join Date: Feb 2009 Location: Alexandria, Virginia Posts: 1,453	Long T55 Gathering my tools for replacing my rear axle hub bearings. Anyone have a source for a 3/8 drive LONG T55 Torx? Everyone has long shanks up to T50 but not T55. Rich __________________ 1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member

11-19-2010	#2
secondchance Join Date: Aug 2006 Location: McLean, VA Posts: 3,715	Re: Long T55 Check w/ Phil. Since we were able to pull mine he must have had one. Come to thisnk of it, may be we used an extension...

11-19-2010	#3
tccrab Join Date: Oct 2004 Location: Folsom CA Posts: 1,657	Re: Long T55 This long enough? http://www.sears.com/shc/s/p_10153_1...&blockType=G20 TomC 'Crabs

11-19-2010	#4
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,646	Re: Long T55 Got both long and short in T55 you are welcome to borrow Phil

11-19-2010	#5
QB93Z Join Date: May 2007 Location: Westminster, Maryland Posts: 3,684	Re: Long T55 I think I used a regular T55 with 3/8 drive extensions to suit. How about scheduling a MD so some of us can come help/supervise? Jim

11-20-2010	#7
QB93Z Join Date: May 2007 Location: Westminster, Maryland Posts: 3,684	Re: Long T55 I will come help put headers on your car. (If it is scheduled on a day I am not working.) Are you planning on replacing the suspension bushings when you replace the hub bearings? Jim

11-20-2010	#9
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,646	Re: Long T55 Good idia Jim Should be a snap if bring along the WAZZO 12 ton duty bench press

11-20-2010	#10
Aurora40 Join Date: May 2005 Location: Leesburg, VA Posts: 2,704	Re: Long T55 FYI, Advance Auto has a set of Torx that have both long and short from about T10 to T60. They are pretty cheap, though they aren't made here. AmPro is the brand. They've worked fine for me so far. The long ones are about 2" long, not crazy long.