Dang! Bad went to worse!!!

[secondchance]

O.k. Since I have been having an alarm trouble, rather than locking with the power lock switch, I closed the door, inserted the door key and turned to lock.
Once locked, I tried to turn counterclockwise to remove the key but it won't budge.
With my limited knowledge;
1. tumbler got screwy and got jammed in lock position.
2. whatever it is that coordinates between cylinder lock to to lock/inlock mechanism is jammed.
3. Or alarm switch (one with wires coming out) behind the lock cylinder is jammed.

I guess I will have o pull the door panel to take a closer look and if all fails, order a pair of lock cylinders.

If anyone has any helpful info please post.

[secondchance]

Anyone with an assembly manual? I can't find any in the shop manual.

[ZR1Vette]

Are you looking for the door [dis]assembly section of the manual? If that is the case I can fax to you

[secondchance]

Originally Posted by ZR1Vette

Are you looking for the door [dis]assembly section of the manual? If that is the case I can fax to you

Yes. If you have it that would be terrific.
Unfortunately, I do not have a fax machine at work. Can you scan?
b.i.yun@cox.net.

[ZR1Vette]

Will do...

[ZR1Vette]

Emails being sent... due to image sizes will send multiple emails...you should clear out as you get them to keep from stuffing your email account

[secondchance]

Originally Posted by ZR1Vette

Emails being sent... due to image sizes will send multiple emails...you should clear out as you get them to keep from stuffing your email account

received them. Thanks a bunch. I might take off this afternoon and take the panel off.

[HIZNHRZ]

Glad to hear you got everything worked out. Did the painter remove the locks? Do you think that had something to do with the problem you had?

[secondchance]

Originally Posted by HIZNHRZ

Glad to hear you got everything worked out. Did the painter remove the locks? Do you think that had something to do with the problem you had?

No. Locks were old and in retrospect, I should have asked him to replace with a new set.
I did confirm that they removed the handle before painting as I have asked. That alone must have added 2-3 hrs - real honest guys. Some painter wouldn't have gone to all that trouble.

[HIZNHRZ]

Good to hear...

So you need to schedule some work so I can give you a hand and return a favor and let me see your younger version of my blk/blk Z!