|
|
|
04-19-2010
|
#1 |
Join Date: Aug 2008
Location: Houston 90 Red ZR-1
Posts: 2,320
|
Great help.
Bill Boudreau called me this weekend and said I here you keep loosing your T/B. He said replace the fork and the pivot ball. If the fork gets it's fingers spread out just a hair then it will allow enough play for the T/B bearing to get side ways. He said the Spec stage 3plus clutch kit I bought is an awesome clutch but the first time I start the car up after install it will make a swoosh sound. After that it will be less noticeable. It does that because it has much more clamping force than stock. He also said that the driveshaft tail nose spline can get stretched out and cause enough play to cause a little vibration. He gave me the Spicer part# for it and where to get it. It was a very fruitful conversation. He also told me about a great technique on how to use feeler gauges to evenly torque down the clutch bolts so when the pressure plate engages that it will ensure even surface contact.
|
|
|
|
04-19-2010
|
#2 |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Great help.
Bill B rocks
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
04-19-2010
|
#3 |
 
Join Date: Dec 2004
Location: Jacksonville, FL USA
Posts: 4,645
|
Re: Great help.
We are truly lucky to know people like Mr. B.
__________________
1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member |
|
|
|
|
04-19-2010
|
#4 |
Join Date: Aug 2005
Location: Scottsdale, AZ
Posts: 2,452
|
Re: Great help.
We are lucky he is here in AZ, he da man
|
|
|
|
|
04-19-2010
|
#5 | |
|
Banned
BANNED
Join Date: Oct 2006
Location: MD
Posts: 3,690
|
Re: Great help.
Quote:
You guys are lucky!!!!!!!!! David |
|
|
|
|
|
04-19-2010
|
#6 |
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
Re: Great help.
Yes, Bill is da man.
Feeler gauge? As it happens...I could prolly use that procedure in a couple weeks. So, doooo tell!! P.
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
|
|
|
|
12-27-2010
|
#7 | |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
|
Re: Great help.
Quote:
|
|
|
|
|
|
12-27-2010
|
#8 |
|
Join Date: Jun 2010
Location: back in lone pine
Posts: 591
|
Re: Great help.
rick did you lose your t bearing again ?????? let me know if so maybe i can move up my timetable and share the tricks bill showed me with ya
|
|
|
|
|
12-27-2010
|
#9 |
|
Join Date: Aug 2007
Location: Spring TX
Posts: 1,348
|
Re: Great help.
yeah rick....whats up?
|
|
|
|
|
12-27-2010
|
#10 | |
|
Join Date: Dec 2004
Location: Jacksonville, FL USA
Posts: 4,645
|
Re: Throwout bearing source
Quote:
 
__________________
1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member |
|
|
|
|
 |
|
|
Hybrid Mode
