Samco Hose Question - ZR-1 Net Registry Forums

ralph92ZR1 · 01-27-2010

I replaced the original air intake duct with a Samco replacement about 18 months ago. Just took the Samco duct off and noticed the band clamp that secures the duct over the throttle body extension was rubbing against the pulley directly below the throttle body extension. The Samco duct fits up to the 2 marks on the throttle body and there is not any "wiggle" room. Any thoughts on what can be done to fix other than actually trimming the thickness of the Samco duct which is not a likely solution. I am probably missing something with the Samco install.
Thanks for your help and advice!

01-28-2010

Is it rubbing or cutting on the AC pulley?

ralph92ZR1 · 01-28-2010

Its rubbing but I do not think it should?

01-29-2010

Quote:

Originally Posted by ralph92ZR1

Its rubbing but I do not think it should?

I was just wondering how much we needed to move. Is it cutting on the metal band or just the rubber?

ralph92ZR1 · 01-29-2010

Its rubbing the metal band. Thanks for answering...

01-29-2010

The overall thickness of the samco is more than the factory plastic duct. You might try seeing if there is a spot that you can use that it will not be hitting the AC pulley. Just move it forward or aft and check and see. If that doesn't work, you are going to need to trim it.

phrogs · 01-30-2010

you could also try to flip it around to see if it sits better that way.

I have one on my car but it came with it so I left it but it seems like I have it installed upside down its the one branded with lingenfelter

01-27-2010	#1
ralph92ZR1 Join Date: Dec 2005 Location: Shillington, Penna. Posts: 67	Samco Hose Question I replaced the original air intake duct with a Samco replacement about 18 months ago. Just took the Samco duct off and noticed the band clamp that secures the duct over the throttle body extension was rubbing against the pulley directly below the throttle body extension. The Samco duct fits up to the 2 marks on the throttle body and there is not any "wiggle" room. Any thoughts on what can be done to fix other than actually trimming the thickness of the Samco duct which is not a likely solution. I am probably missing something with the Samco install. Thanks for your help and advice! __________________ [FONT=Franklin Gothic Medium]Ralph E. Weise [/FONT]:) '92 ZR-1#473 Red/Red

01-28-2010	#2
Jeffvette Guest Posts: n/a	Re: Samco Hose Question Is it rubbing or cutting on the AC pulley?

01-28-2010	#3
ralph92ZR1 Join Date: Dec 2005 Location: Shillington, Penna. Posts: 67	Re: Samco Hose Question Its rubbing but I do not think it should? __________________ [FONT=Franklin Gothic Medium]Ralph E. Weise [/FONT]:) '92 ZR-1#473 Red/Red

01-29-2010	#5
ralph92ZR1 Join Date: Dec 2005 Location: Shillington, Penna. Posts: 67	Re: Samco Hose Question Its rubbing the metal band. Thanks for answering... __________________ [FONT=Franklin Gothic Medium]Ralph E. Weise [/FONT]:) '92 ZR-1#473 Red/Red

01-29-2010	#6
Jeffvette Guest Posts: n/a	Re: Samco Hose Question The overall thickness of the samco is more than the factory plastic duct. You might try seeing if there is a spot that you can use that it will not be hitting the AC pulley. Just move it forward or aft and check and see. If that doesn't work, you are going to need to trim it.

01-30-2010	#7
phrogs Join Date: Jul 2004 Location: Kalamazoo MI Posts: 1,753	Re: Samco Hose Question you could also try to flip it around to see if it sits better that way. I have one on my car but it came with it so I left it but it seems like I have it installed upside down its the one branded with lingenfelter __________________ JOHNNY P Currently own 90 ZR-1 #845 DRM 500 engine package 90 #226 Parts car Hit me up if you need anything.