|
|
|
11-08-2009
|
#1 |
 Join Date: Oct 2008
Location: Colleyville, TX
Posts: 272
|
Side Bolsters
The side bolsters on both seats appear to out of order. The pumps work fine, it seems, as they pump up the lumbar support. Is there anything else besides the bolsters that can be checked or replacement the only option? Are they still available and from where?
Thanks in advance Jim |
|
|
|
11-08-2009
|
#2 | |
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
|
Re: Side Bolsters
Quote:
more then likely a bad switch.. if you are willing you can take it apart and clean it.. or buy used from Whiteracing or eBay as they are NLA from GM
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
|
|
11-08-2009
|
#3 |
|
Join Date: Oct 2008
Location: Colleyville, TX
Posts: 272
|
Re: Side Bolsters
Switches seem good. Pump runs and inflates lumbar, but not bolsters.
Jim |
|
|
|
|
11-08-2009
|
#4 | |
|
Guest
Posts: n/a
|
Re: Side Bolsters
Quote:
Side lumbar are not air controlled. They are a fixed mount connected to a motor/rod that mechanically adjust in and out. There is a separate toggle switch to operate them. |
|
|
|
|
11-08-2009
|
#5 | |
|
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
|
Re: Side Bolsters
Quote:
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
|
|
11-08-2009
|
#6 |
|
Join Date: Oct 2008
Location: Colleyville, TX
Posts: 272
|
Re: Side Bolsters
My mistake. I was deducted for the side bladders (on seat bottom section) nnot working. Seat bolsters are working normally. I don't see anything in the Owner's Manual about the sides of the seat bottom inflating, nor do I see a control for that function. Am I stupid or just really unobservant? Where is the control for this, if there is one?
Jim |
|
|
|
 |
|
|
Hybrid Mode
