Headers - ZR-1 Net Registry Forums

NVRL8TE · 01-13-2022

Has anyone used either of these with good success?

HAWAIIZR-1 · 01-13-2022

Sorry, I know this does not answer your question. Just in case you are not aware, if you are a Registry member there is a good discount for Stainless Works headers while buying made in the USA.

Sent from my iPhone using ZR-1 Net Registry

NVRL8TE · 01-13-2022

Quote:

Originally Posted by HAWAIIZR-1

Sorry, I know this does not answer your question. Just in case you are not aware, if you are a Registry member there is a good discount for Stainless Works headers while buying made in the USA.

Sent from my iPhone using ZR-1 Net Registry

Thanks!!! I?ve been meaning to call, I think John, to register.

jw63 · 01-13-2022

Quote:

Originally Posted by HAWAIIZR-1

Sorry, I know this does not answer your question. Just in case you are not aware, if you are a Registry member there is a good discount for Stainless Works headers while buying made in the USA.

Sent from my iPhone using ZR-1 Net Registry

I was also unaware of this. Can anyone share the process of accessing the discount with Stainless Works?

Is there a forum section / post anywhere that lists any other vendors that offer registry discounts for members?

Sent from my iPhone using ZR-1 Net Registry

HAWAIIZR-1 · 01-13-2022

Here is how to get the discount from Hans? old post.Image1642088046.764653.jpg

Sent from my iPhone using ZR-1 Net Registry

sleazy rider · 01-21-2022

just be aware that stainless works will only sell headers with cats. i went thru the registry and got mine fabbed up last year, 3" all the way back to the resonator. then i had them jet hot coated.

NVRL8TE · 01-21-2022

Quote:

Originally Posted by sleazy rider

just be aware that stainless works will only sell headers with cats. i went thru the registry and got mine fabbed up last year, 3" all the way back to the resonator. then i had them jet hot coated.

I do not want cats.

Mr Blue · 01-21-2022

I have the Maximizer headers on my 91. Good quality and fit. I had to dimple #1 pipe to clear the steering shaft. I am in the Akron area if you would like to take a look.

NVRL8TE · 01-23-2022

Quote:

Originally Posted by Mr Blue

I have the Maximizer headers on my 91. Good quality and fit. I had to dimple #1 pipe to clear the steering shaft. I am in the Akron area if you would like to take a look.

I would actually love to!

Jcsws6 · 01-23-2022

I recently installed a set of Maximizers on one of my cars and really like them. The quality was better than the last set of SW I bought. As Mr. Blue said, you need to dimple for the steering shaft a bit. You also need to make the little bracket to offset the dipstick tub. I plan to install a few more sets of them in the future.

As a side note, the OBX catback isn't bad either. You need to replace all the clamps, but the build quality is good.

01-13-2022	#2
HAWAIIZR-1 Join Date: May 2010 Location: Japan Posts: 3,583	Headers Sorry, I know this does not answer your question. Just in case you are not aware, if you are a Registry member there is a good discount for Stainless Works headers while buying made in the USA. Sent from my iPhone using ZR-1 Net Registry __________________ Craig "ZR-1 NO KA 'OI" "ZR-1 ICHIBAN" 1995 #228 Black/Black with Dunn Heads ZR-1 owner since September 2003 ZR-1 Net Registry Founding Member #0074 NCM Lifetime Member #2048 Last edited by HAWAIIZR-1; 01-13-2022 at 02:42 AM.

01-13-2022	#5
HAWAIIZR-1 Join Date: May 2010 Location: Japan Posts: 3,583	Headers Here is how to get the discount from Hans? old post.Image1642088046.764653.jpg Sent from my iPhone using ZR-1 Net Registry __________________ Craig "ZR-1 NO KA 'OI" "ZR-1 ICHIBAN" 1995 #228 Black/Black with Dunn Heads ZR-1 owner since September 2003 ZR-1 Net Registry Founding Member #0074 NCM Lifetime Member #2048 Last edited by HAWAIIZR-1; 01-14-2022 at 01:16 AM.

01-21-2022	#8
Mr Blue Join Date: Feb 2013 Location: Tallmadge OH Posts: 116	Re: Headers I have the Maximizer headers on my 91. Good quality and fit. I had to dimple #1 pipe to clear the steering shaft. I am in the Akron area if you would like to take a look.

01-23-2022	#10
Jcsws6 Join Date: May 2021 Location: Freeburg IL Posts: 49	Re: Headers I recently installed a set of Maximizers on one of my cars and really like them. The quality was better than the last set of SW I bought. As Mr. Blue said, you need to dimple for the steering shaft a bit. You also need to make the little bracket to offset the dipstick tub. I plan to install a few more sets of them in the future. As a side note, the OBX catback isn't bad either. You need to replace all the clamps, but the build quality is good.