** TQ specs Please? **

[Zethco]

I'm working to get the car back together for BG. I started to do some maintenance/fixes before surgery a couple months ago and now it's time to get this bad boy fired up again.

I cannot find my FSM (go figure) and need some TQ specs for my '94 pretty please.

1. Air Horn to TB
2. PS Pump Bracket (to head and that %$#'ing top bolt that caused me to remove the AH!)
3. Belt Tensioner

I will also be re-installing the radiator/oil cooler and I *think* I've got the method understood for coolant refill procedure - and I did print out M.H.'s article on it. But any tips are most certainly appreciated.

Thanks y'all

[Dynomite]

Originally Posted by Zethco

I'm working to get the car back together for BG. I started to do some maintenance/fixes before surgery a couple months ago and now it's time to get this bad boy fired up again.

I cannot find my FSM (go figure) and need some TQ specs for my '94 pretty please.

1. Air Horn to TB
2. PS Pump Bracket (to head and that %$#'ing top bolt that caused me to remove the AH!)
3. Belt Tensioner

I will also be re-installing the radiator/oil cooler and I *think* I've got the method understood for coolant refill procedure - and I did print out M.H.'s article on it. But any tips are most certainly appreciated.

Thanks y'all

Try this http://www.teamzr1.com/ubbthreads/ub...at&Number=1042

Have lots of fun at BG

I concur on the web site above being a bit different but many of those torque values are correct (I am working on that in Solutions).

Looking at the manual shown below.....

I find throttle body extension to throttle body screw is 53 in-lbs.
I find Belt tensioner to coolant pump is 45 ft-lbs.

Again....I am still working on the correct values

[Zethco]

With all the links I've saved, didn't even know that site existed. Man I've been away a while!

THANK YOU 23x

Michael

[ScottZ95ZR1]

Appears that link is to their C5 Tech directory.

[IowaZR-1]

I think I would use what's in the Service Manual for torque specs. The ones on that pages don't match what's in the service manual. 22 lb. ft. for cylinder head bolts the first pass....no torque specs for the next 2 passes....what engine is this???

[Zethco]

Originally Posted by IowaZR-1

I think I would use what's in the Service Manual for torque specs. The ones on that pages don't match what's in the service manual. 22 lb. ft. for cylinder head bolts the first pass....no torque specs for the next 2 passes....what engine is this???

Yea, looks like I still need these specs. Link looks to be for a different motor.

Anyone have the TQ specs by chance? Cant find my FSM.