Group buy on anti-hood prop failure piece - ZR-1 Net Registry Forums

carter200 · 05-03-2013

Recently many have complained about the hood props falling down do to wind, bumping, etc. Well, no longer will you have to worry about the hood falling on your head. CT Machining has manufactured an item that gaurantees that the hood will NOT fall if you use the item they have invented. The item is made of 6061 T6 aircraft aluminum and fits in your pocket. You will be proud to own and display this item.

There will be a group buy running thru next Thursday for the "Hood Prop Stop"

C4 Hood Prop Stop - 1.JPG

C4 Hood Prop Stop - 4.JPG

C4 Hood Prop Stop - 5.JPG

C4 Hood Prop Stop - 6.JPG

The price is $15 (delivered to BG) and $18 shipped. You asked for them and they are now here. Thank you, Carter

PS: Minimum order of 15 to have them delivered to BG......

scottfab · 05-03-2013

On my 90 there is no notched area on the lower tube.
Is that necessary for the piece to fit?

carter200 · 05-03-2013

Scott,
I see the notch you are talking about and your rod may not have the notch but the rod has to sit on top of the bottom tube and this item will still work just fine.

vettn71 · 05-03-2013

Can't see the photos

Jim

GOLDCYLON · 05-03-2013

I'm in Carter that's 1

carter200 · 05-03-2013

Thanks GC. Knew I could count on you...........

902066 · 05-03-2013

The hood prop looks nice , I'd like to have one. I'm not going to Bowling Green, and I don't have Pay-Pal. How do we do this? Thanks.

carter200 · 05-03-2013

Quote:

Originally Posted by 902066

The hood prop looks nice , I'd like to have one. I'm not going to Bowling Green, and I don't have Pay-Pal. How do we do this? Thanks.

I'll PM you the paymetn info.......

GOLDCYLON · 05-05-2013

Quote:

Originally Posted by carter200

Thanks GC. Knew I could count on you...........

Carter PayPal sent.

carter200 · 05-06-2013

Quote:

Originally Posted by GOLDCYLON

Carter PayPal sent.

Thanks, GC

05-03-2013	#1
carter200 Join Date: Jun 2004 Location: Texas Posts: 2,431	Group buy on anti-hood prop failure piece Recently many have complained about the hood props falling down do to wind, bumping, etc. Well, no longer will you have to worry about the hood falling on your head. CT Machining has manufactured an item that gaurantees that the hood will NOT fall if you use the item they have invented. The item is made of 6061 T6 aircraft aluminum and fits in your pocket. You will be proud to own and display this item. There will be a group buy running thru next Thursday for the "Hood Prop Stop" C4 Hood Prop Stop - 1.JPG C4 Hood Prop Stop - 4.JPG C4 Hood Prop Stop - 5.JPG C4 Hood Prop Stop - 6.JPG The price is $15 (delivered to BG) and $18 shipped. You asked for them and they are now here. Thank you, Carter PS: Minimum order of 15 to have them delivered to BG...... __________________ 95 ZR-1 BLK/Gry #392 LT5 Reg# 868 RIP ZR1NET Founding Mem #155 Last edited by carter200; 05-03-2013 at 08:35 PM.

05-03-2013	#2
scottfab Join Date: Jan 2009 Location: Portland Oregon metro area (Washington side) Posts: 3,207	Re: Group buy on anti-hood prop failure piece On my 90 there is no notched area on the lower tube. Is that necessary for the piece to fit? __________________ Scott Vett owner since 1979._It's about the car and the people

05-03-2013	#3
carter200 Join Date: Jun 2004 Location: Texas Posts: 2,431	Re: Group buy on anti-hood prop failure piece Scott, I see the notch you are talking about and your rod may not have the notch but the rod has to sit on top of the bottom tube and this item will still work just fine. __________________ 95 ZR-1 BLK/Gry #392 LT5 Reg# 868 RIP ZR1NET Founding Mem #155 Last edited by carter200; 05-03-2013 at 08:35 PM.

05-03-2013	#4
vettn71 Join Date: Oct 2008 Location: Colleyville, TX Posts: 272	Re: Group buy on anti-hood prop failure piece Can't see the photos Jim

05-03-2013	#5
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: Group buy on anti-hood prop failure piece I'm in Carter that's 1 __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

05-03-2013	#7
902066 Join Date: Jul 2005 Posts: 190	Re: Group buy on anti-hood prop failure piece The hood prop looks nice , I'd like to have one. I'm not going to Bowling Green, and I don't have Pay-Pal. How do we do this? Thanks.