|
![]() |
#1 |
Join Date: May 2018
Location: Virginia
Posts: 79
|
![]()
When removing the sway bar end links, should the suspension be under load? I have the car supported on a Quickjack lift. When disconnecting the LR end link I heard a loud "pop" when I loosened the lower bolt. Almost like something was shifting under tension. The pop was not from the bolt breaking as it tightened back up fine.
Thanks |
![]() |
![]() |
![]() |
#2 |
![]() Join Date: Apr 2007
Location: Northern VA
Posts: 2,655
|
![]()
Both wheels should be off the ground so the sway bar is unloaded.
Sent from my iPhone using ZR-1 Net Registry
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake |
![]() |
![]() |
![]() |
#3 |
Join Date: May 2018
Location: Virginia
Posts: 79
|
![]()
Thanks. That's what I figured. Both wheels are off the ground/off the car so the sway bar should be in a state of rest with zero load on either side.
|
![]() |
![]() |
![]() |
|
|