Shelby Wheel Questions - ZR-1 Net Registry Forums

32valvZ · 03-13-2020

I did a search, but I couldn't find a definite answer.

Can you simply install the wheels over factory brakes without moving the centers to the outside?

Will longer wheel studs be needed?

Are special lug nuts needed?

Not seeing allot of choices for the 335 30 18 sizes... What are you guys running for tires?

Flyman 27 · 03-13-2020

For Shelby Series One Wheels:
Yes, they clear my C4 ZR-1 brakes easily.
No, longer studs are not required, but I am installing studs that are threaded the full length so there is more engagement between the stud & nut.
I am running 335/30ZR18 and 285/30ZR18 abd I have no clearance issues.

EvanZR1 · 03-13-2020

You only need to move the centers to the outside if you're doing C5 brakes.

Dime · 03-18-2020

You can just throw them on if it’s c4 brakes. I’m running Toyo r888r’s. They’re not cheap, but they sure do have a lot of grip.

https://imgur.com/gallery/ObDdVGq

32valvZ · 03-18-2020

Thank you, but I gave up on the Shelbys... I found 2 people with NIB sets, but shipping is so damn ridiculous, (around $500.) its just not worth it to me.

Bought a set of new Nitto NT555 G2s Maybe in the meantime someone geographically closer to me might have a set available....

viper107 · 03-18-2020

what about fikse wheels, anybody got a set? those are cool looking

tf95ZR1 · 03-18-2020

Quote:

Originally Posted by viper107

what about fikse wheels, anybody got a set? those are cool looking

$$

G8nightman · 03-19-2020

You can buy fikse new I did see a set of 17 inch fm5s for sale I think it was on corvette forum

Sent from my iPhone using ZR-1 Net Registry

32valvZ · 03-19-2020

The whole point was to go to 18" for increased tire selection... but it doesnt matter, at least until my new Nittos wear out or age out... I put the money I would have spent on getting the drilled and slotted rotors replaced with the OEM GM rotors which I had turned, and new pads as well as new front FX3 shocks...

03-13-2020	#1
32valvZ Join Date: Nov 2007 Location: Sunshine State Posts: 1,071	Shelby Wheel Questions I did a search, but I couldn't find a definite answer. Can you simply install the wheels over factory brakes without moving the centers to the outside? Will longer wheel studs be needed? Are special lug nuts needed? Not seeing allot of choices for the 335 30 18 sizes... What are you guys running for tires? __________________ [B]1990 #2815[/B] [COLOR="Red"][B]Red/Red[/B][/COLOR] Ported Plenum & IH (by Pete) Haibeck Chip Rebuilt FPR (by Phil) FIC Injectors Watson LT Headers 3" Stainless Works exhaust Lingenfelter Open Air Lid Bill B Built Transmission Shifter & C Beam Plates [FONT=Impact][COLOR=red]1992 [COLOR=black]#[/COLOR] 091[/COLOR][/FONT] [FONT=Impact][COLOR=#ff0000]Red/[COLOR=silver]Gray[/COLOR][/COLOR][/FONT] [B]SOLD[/B]

03-13-2020	#2
Flyman 27 Join Date: Apr 2017 Location: Wayne Illinois Posts: 402	Re: Shelby Wheel Questions For Shelby Series One Wheels: Yes, they clear my C4 ZR-1 brakes easily. No, longer studs are not required, but I am installing studs that are threaded the full length so there is more engagement between the stud & nut. I am running 335/30ZR18 and 285/30ZR18 abd I have no clearance issues. __________________ 91-#1935 Black/black & gray, Haibeck 500 Cams by Pete

03-13-2020	#3
EvanZR1 Join Date: Nov 2010 Location: Omaha Posts: 403	Re: Shelby Wheel Questions You only need to move the centers to the outside if you're doing C5 brakes. __________________ Evan 2024 Z06 SOLD - 1991 Admiral Blue ZR-1 SOLD - 2012 Carlisle Blue Metallic ZR1 - 800HP SOLD - Steel Blue 91 391cid ZR-1 #391 SOLD - Black 91 ZR-1

03-18-2020	#4
Dime Join Date: Feb 2011 Location: Vicksburg, MS Posts: 135	Re: Shelby Wheel Questions You can just throw them on if it’s c4 brakes. I’m running Toyo r888r’s. They’re not cheap, but they sure do have a lot of grip. https://imgur.com/gallery/ObDdVGq __________________ [B][U]1991 No. 519[/U][/B] Last edited by Dime; 03-18-2020 at 10:43 AM.

03-18-2020	#5
32valvZ Join Date: Nov 2007 Location: Sunshine State Posts: 1,071	Re: Shelby Wheel Questions Thank you, but I gave up on the Shelbys... I found 2 people with NIB sets, but shipping is so damn ridiculous, (around $500.) its just not worth it to me. Bought a set of new Nitto NT555 G2s Maybe in the meantime someone geographically closer to me might have a set available.... __________________ [B]1990 #2815[/B] [COLOR="Red"][B]Red/Red[/B][/COLOR] Ported Plenum & IH (by Pete) Haibeck Chip Rebuilt FPR (by Phil) FIC Injectors Watson LT Headers 3" Stainless Works exhaust Lingenfelter Open Air Lid Bill B Built Transmission Shifter & C Beam Plates [FONT=Impact][COLOR=red]1992 [COLOR=black]#[/COLOR] 091[/COLOR][/FONT] [FONT=Impact][COLOR=#ff0000]Red/[COLOR=silver]Gray[/COLOR][/COLOR][/FONT] [B]SOLD[/B]

03-18-2020	#6
viper107 Join Date: Dec 2019 Location: st louis mo Posts: 749	Re: Shelby Wheel Questions what about fikse wheels, anybody got a set? those are cool looking

03-19-2020	#8
G8nightman Join Date: Dec 2007 Location: NYC Posts: 1,188	Re: Shelby Wheel Questions You can buy fikse new I did see a set of 17 inch fm5s for sale I think it was on corvette forum Sent from my iPhone using ZR-1 Net Registry __________________ 90 Chevy ZR1 LPE #2315 'SOLD' 90 Chevy ZR1 LPE #2774 'SOLD' 91 Chevy ZR1 Callaway aerobody 91 Chevy ZR1 #1512 91 Chevy ZR1 #951 95 Chevy ZR1 #338 'SOLD' 91 BMW 850i 94 BMW 850csi 95 BMW 850csi 94 Lotus Esprit S4 07 Benz CLS550 06 BMW M5 "SOLD"

03-19-2020	#9
32valvZ Join Date: Nov 2007 Location: Sunshine State Posts: 1,071	Re: Shelby Wheel Questions The whole point was to go to 18" for increased tire selection... but it doesnt matter, at least until my new Nittos wear out or age out... I put the money I would have spent on getting the drilled and slotted rotors replaced with the OEM GM rotors which I had turned, and new pads as well as new front FX3 shocks... __________________ [B]1990 #2815[/B] [COLOR="Red"][B]Red/Red[/B][/COLOR] Ported Plenum & IH (by Pete) Haibeck Chip Rebuilt FPR (by Phil) FIC Injectors Watson LT Headers 3" Stainless Works exhaust Lingenfelter Open Air Lid Bill B Built Transmission Shifter & C Beam Plates [FONT=Impact][COLOR=red]1992 [COLOR=black]#[/COLOR] 091[/COLOR][/FONT] [FONT=Impact][COLOR=#ff0000]Red/[COLOR=silver]Gray[/COLOR][/COLOR][/FONT] [B]SOLD[/B]