C4 Zr1 to C6zr1 brakes - ZR-1 Net Registry Forums

1LEZ · 09-18-2018

I am currently installing C6 Zr1 brakes on my 1990 Zr1. I was hoping that the C4 to C6 Z06 apapters would work but they impact the C6 Zr1 caliper. My next move is to try C6 Z06 steering knuckles on my car. This brake conversion works on a C5 by changing to the C6 z06 knuckle so that is what I am trying. It looks observationally like the C6 Z06 knuckle should fit but.. the wheel hub isn't the same which leads me to believe I should install the C6 Z06 wheel bearing/hub. The problem with this is, does the wheel speed sensor for the C6 Z06 acquire data in the same way as my 1990 Zr1? Are the reluctors the same?

Any help in anyway is greatly needed and appreciated.

Locobob · 09-18-2018

I saw someone on one of the FB Corvette groups putting C7 Z07 brakes on his Z, from what I gathered he didn't use an adapter but just ovaled the existing bolt holes and the calipers bolted right up, the rotors needed to be shimmed a little to fit properly, not sure if he's a member here but he should be. Anyhow if those go on that easy it would seem like the way to go for a monster brake upgrade.

1LEZ · 09-18-2018

Yeah I saw that. The C7 Z06 caliper is not the same as the C6 ZR1 caliper although it would appear so at first glance

WVZR-1 · 09-18-2018

Quote:

Originally Posted by 1LEZ

I am currently installing C6 Zr1 brakes on my 1990 Zr1. I was hoping that the C4 to C6 Z06 apapters would work but they impact the C6 Zr1 caliper. My next move is to try C6 Z06 steering knuckles on my car. This brake conversion works on a C5 by changing to the C6 z06 knuckle so that is what I am trying. It looks observationally like the C6 Z06 knuckle should fit but.. the wheel hub isn't the same which leads me to believe I should install the C6 Z06 wheel bearing/hub. The problem with this is, does the wheel speed sensor for the C6 Z06 acquire data in the same way as my 1990 Zr1? Are the reluctors the same?

Any help in anyway is greatly needed and appreciated.

Spindles/knuckles - hub/bearing isn't going to work - 'NO WAY' everything is different.

** The modification mentioned to bolt on the C7 stuff 'directly' is scary. I didn't mention it there but I ain't ever seen 'elongated' mounting points for safety related stuff.

Locobob · 09-18-2018

The ovaling wasn't much according to the guy doing this, just a tiny bit so the bolts went in straight.

Locobob · 09-18-2018

OP, you might try contacting KORE3 to see if they have any ideas for you, they do a lot of brake conversion stuff including adapter brackets. I talked to them some years ago about doing a conversion and they seemed pretty sharp.

http://www.kore3.com/

1LEZ · 09-22-2018

Update.

With some minor caliper modification (milling some inordinate material off the calipers) everything has bolted up with no need to try and use a C6 knuckle. *I don't think I am completely out of the woods yet but I THINK I have leaped the biggest hurdles. *I will post pics and updates when I am closer to being completed. *Thanks all for your help and input!

Jagdpanzer · 09-22-2018

Great mod, keep us posted

Sent from my iPhone using ZR-1 Net Registry

1LEZ · 09-22-2018

Will do

1LEZ · 09-24-2018

Updates. Both front and rear calipers had to be milled to accept the C6 Z06 adapters. Also a universal parking brake kit had to be slightly modified to work with this set up as well. Hopefully another week and I’ll have the car on the ground.I'm using C6 ZR-1 *wheels as a temporary solution until I can get Forgelines ordered.

09-18-2018	#1
1LEZ Join Date: Nov 2016 Location: Tx Posts: 101	C4 Zr1 to C6zr1 brakes I am currently installing C6 Zr1 brakes on my 1990 Zr1. I was hoping that the C4 to C6 Z06 apapters would work but they impact the C6 Zr1 caliper. My next move is to try C6 Z06 steering knuckles on my car. This brake conversion works on a C5 by changing to the C6 z06 knuckle so that is what I am trying. It looks observationally like the C6 Z06 knuckle should fit but.. the wheel hub isn't the same which leads me to believe I should install the C6 Z06 wheel bearing/hub. The problem with this is, does the wheel speed sensor for the C6 Z06 acquire data in the same way as my 1990 Zr1? Are the reluctors the same? Any help in anyway is greatly needed and appreciated.

09-18-2018	#2
Locobob Join Date: Jan 2004 Location: Portland, OR Posts: 1,057	Re: C4 Zr1 to C6zr1 brakes I saw someone on one of the FB Corvette groups putting C7 Z07 brakes on his Z, from what I gathered he didn't use an adapter but just ovaled the existing bolt holes and the calipers bolted right up, the rotors needed to be shimmed a little to fit properly, not sure if he's a member here but he should be. Anyhow if those go on that easy it would seem like the way to go for a monster brake upgrade. __________________ Robert ZR-1 Net Registry Oregon State Director 91 ZR-1 #431 Black/Black LPE 368 Last edited by Locobob; 09-18-2018 at 09:40 PM.

09-18-2018	#3
1LEZ Join Date: Nov 2016 Location: Tx Posts: 101	Re: C4 Zr1 to C6zr1 brakes Yeah I saw that. The C7 Z06 caliper is not the same as the C6 ZR1 caliper although it would appear so at first glance

09-18-2018	#5
Locobob Join Date: Jan 2004 Location: Portland, OR Posts: 1,057	Re: C4 Zr1 to C6zr1 brakes The ovaling wasn't much according to the guy doing this, just a tiny bit so the bolts went in straight. __________________ Robert ZR-1 Net Registry Oregon State Director 91 ZR-1 #431 Black/Black LPE 368 Last edited by Locobob; 09-18-2018 at 11:05 PM.

09-18-2018	#6
Locobob Join Date: Jan 2004 Location: Portland, OR Posts: 1,057	Re: C4 Zr1 to C6zr1 brakes OP, you might try contacting KORE3 to see if they have any ideas for you, they do a lot of brake conversion stuff including adapter brackets. I talked to them some years ago about doing a conversion and they seemed pretty sharp. http://www.kore3.com/ __________________ Robert ZR-1 Net Registry Oregon State Director 91 ZR-1 #431 Black/Black LPE 368 Last edited by Locobob; 09-18-2018 at 11:10 PM.

09-22-2018	#7
1LEZ Join Date: Nov 2016 Location: Tx Posts: 101	Re: C4 Zr1 to C6zr1 brakes Update. With some minor caliper modification (milling some inordinate material off the calipers) everything has bolted up with no need to try and use a C6 knuckle. I don't think I am completely out of the woods yet but I THINK I have leaped the biggest hurdles. I will post pics and updates when I am closer to being completed. *Thanks all for your help and input!

09-22-2018	#8
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,658	Re: C4 Zr1 to C6zr1 brakes Great mod, keep us posted Sent from my iPhone using ZR-1 Net Registry __________________ Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake

09-22-2018	#9
1LEZ Join Date: Nov 2016 Location: Tx Posts: 101	Re: C4 Zr1 to C6zr1 brakes Will do

09-24-2018	#10
1LEZ Join Date: Nov 2016 Location: Tx Posts: 101	Re: C4 Zr1 to C6zr1 brakes Updates. Both front and rear calipers had to be milled to accept the C6 Z06 adapters. Also a universal parking brake kit had to be slightly modified to work with this set up as well. Hopefully another week and I’ll have the car on the ground.I'm using C6 ZR-1 *wheels as a temporary solution until I can get Forgelines ordered.