|
![]() |
#1 |
![]() Join Date: Dec 2003
Posts: 475
|
![]()
Anyone have the central hanger that wraps around the resonator?
Thanks, George |
![]() |
![]() |
![]() |
#2 |
![]() Join Date: Oct 2004
Posts: 1,889
|
![]() |
![]() |
![]() |
![]() |
#3 |
![]() Join Date: Dec 2003
Posts: 475
|
![]()
'90 please
|
![]() |
![]() |
![]() |
#4 |
![]() Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
![]()
I have a few exhaust hangers in the basement.....whats the difference between a 90 and 91+?? Any pics
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
![]() |
![]() |
![]() |
#5 |
![]() Join Date: Dec 2003
Posts: 475
|
![]()
IDK. Anyone? Tks.
|
![]() |
![]() |
![]() |
#6 |
![]() Join Date: Oct 2004
Posts: 1,889
|
![]()
I don't know the difference in '90 and the '91+ but it is a different part number. I asked only because there's been many NCRS requests and if this were for an NCRS project it could be of concern. If I needed one I'd likely try either.
The '92+ LT1 cars use the same hanger so there shouldn't be a problem collecting one to try. |
![]() |
![]() |
![]() |
#7 |
![]() Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
![]()
My 1990 did not seem to be drastically different on my car, but maybe is was switched with the Corsa system before I bought it.....I will look again but I did not see a part # on either of them.
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
![]() |
![]() |
![]() |
#8 |
![]() Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
![]()
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
![]() |
![]() |
![]() |
#9 |
![]() Join Date: Dec 2003
Posts: 475
|
![]()
Lee. I guess so. Thank you. George.
|
![]() |
![]() |
![]() |
#10 |
![]() Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,680
|
![]()
Some 1990 hangers have extra screws on the passenger side of trans tail housing,they are a pain to take off you can only do it with open end wrench little at a time.
Kind of like a U shape,if you cut the one part of the U bracket it will look just like a 1991 and later brackets. GM must've have figured out they didn't need 4 screws for that part of the exhaust bracket. The 1991 bracket will work on the 1990 just the same as they do on all 1991-1996. Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
![]() |
![]() |
![]() |
|
|