|
12-09-2017 | #1 |
Join Date: Dec 2017
Location: southern california
Posts: 1
|
WANTED: Cam position sensor and Dual mass flywheel for 1990 ZR1 LT5
Hello. Looking for a camshaft position sensor for my 1990 ZR1. From what I understand, there are a few part numbers: 10096172 and 10137658. Possibly more???? Please let me know if you have one, new or used. THANKS!
Maybe a dual mass flywheel too!!!! Please let me know if you have either Last edited by mlubahn; 12-09-2017 at 09:22 PM. |
12-09-2017 | #2 |
Join Date: Sep 2016
Location: Ocala, FL
Posts: 894
|
Re: WANTED: Cam position sensor for LT5
I am looking also. All I have found is 239.95 at napa. Whew! Any leads are appreciated.
|
12-10-2017 | #3 | |
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
|
Re: WANTED: Cam position sensor and Dual mass flywheel for 1990 ZR1 LT5
Quote:
H
__________________
90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold. |
|
12-10-2017 | #4 |
Join Date: Sep 2016
Location: Ocala, FL
Posts: 894
|
Re: WANTED: Cam position sensor for LT5
Mr. Dynamite. Jerrys link submitted is for a crank sensor. Jerry has no listing for cam sensors. Any other suppliers anyone can share?
|
12-12-2017 | #5 |
Join Date: Oct 2004
Posts: 1,890
|
Re: WANTED: Cam position sensor for LT5
Some potential after-market other than the NAPA selection BUT only for the later 10137658 which is also the NAPA interchange.
WELLS - SU1101 SMP - PC110 AIRTEX - 5S1254 AUTOPART INTERNATIONAL - 1802-302169 (couldn't confirm with an image) When the GM 10137658 was used to replace the 10096172 there were GM notes that mentioned a different shield GM 10199080 likely required. 10096172 seems to have been used '90 & '91 with the 10137658 potentially in later '92+ builds. If your '90 is apart it might be interesting to compare the shield differences with snapshots. |
12-13-2017 | #6 |
Join Date: Dec 2007
Location: Fremont,Ca
Posts: 3,073
|
Re: WANTED: Cam position sensor for LT5
I have an AIRTEX in my car,think it was $200. As stated the original shield won’t work with this part.
|
12-18-2017 | #7 |
Join Date: Sep 2016
Location: Ocala, FL
Posts: 894
|
Re: WANTED: Cam position sensor for LT5
Gentlemen, I am desperate to purchase a camshaft positioning sensor. A month ago napa had five within the country, now they have none. I have used all of the part numbers I have called manufacturers I have spent hours on the Internet and I have come up blank. I waited until I got my bonus last Friday and that was too long. My car backfired coughed stumbled and died in traffic Saturday evening. Started right up after I stopped though. Code 31 once again. Desperate in Florida.
|
12-18-2017 | #8 |
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
|
Re: WANTED: Cam position sensor for LT5
I hesitate to say it but White Racing Products in FL. shows one in stock. $296.00
These guys are a craps shoot http://www.whiteracingproducts.com/i...roducts_id=596 The next site has a listing of dealers that supposedly have them in stock. Good luck! http://oemcats.com/oem-parts/10137658.html H
__________________
90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold. Last edited by Ccmano; 12-18-2017 at 01:46 PM. |
12-18-2017 | #9 |
Join Date: Apr 2007
Location: Northern VA
Posts: 2,658
|
VRe: WANTED: Cam position sensor for LT5
Wonder if there is an alternative sensor out there that could be adapted to work in place of the original OEM cam sensor?
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake Last edited by Jagdpanzer; 12-18-2017 at 05:56 PM. |
12-19-2017 | #10 |
Join Date: Oct 2004
Posts: 1,890
|
Re: WANTED: Cam position sensor for LT5
The OP hasn't been back so "Young1" do you have the cam sensor removed and on the bench? I believe I've sorted this.
Phil do you have one on the bench? OP - how about you? |
|
|