|
![]() |
#1 |
![]() ![]() Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
![]()
As some of you may know, I was asked to consider picking up the job of editor for the Registry magazine, stepping in (or into it!) after Phil resigned due to his heavy job work and travel load responsibilities kept him away from being able to focus the attention to the Registry that he feels it deserves.
I said I would be happy to do it, if the board so desired, and the board voted on it. All I have to say is, "Be careful of what you wish for!! Well...As I have said, the magazine was initiated before the internet and this forum web page, and was the sole beacon for information on all things ZR-1. But, since then times have changed. The forums indisputably fill the broader need of information "on demand". Without the internet - without the ZR-1 Net Registry(!) owning a ZR-1 would be an entirely different experience for most of us. I think it is safe to say that a lot fewer of these icons would still be on the road, and certainly not seen still in "ballz out" track competion as they still are today if not for the network of Brothers and this forum. A quarterly magazine would have a difficult time meeting the scope of topics and discussions we take for granted by accessing the forums. So, the question is: "What need is there that the Registry could best provide, and how can it suppliment the forums, and in what ways?" Well, I'm just putting that out there to let you know that if you have ideas with regard to adding value to the Registry magazine, the door is always open. Having said that and in the near term, I'm officially extending a "call for papers" to anyone that has a story, or technical article, or an event to report or share, or calendar items perhaps that they might like to have put in the next edition, please PM me with the details, and questions. Thank you...Thank you very much! Paul.
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
![]() |
![]() |
![]() |
#2 |
![]() Join Date: May 2005
Location: Georgia Mountains
Posts: 926
|
![]()
Paul, there will probably be more than a few moments when you throw up your hands and utter that phrase more than a few times ...
that said, "Thank You" for stepping up and volunteering for an important job within the Registry's structure. One observation ... it's really easy for the rest of us to "duck" the responsibility of helping out when there are many members within the ranks with a good "how to" article, a good story to tell, and on and on. And the rest of us really enjoy reading these articles. More than once I've read some really good "articles" posted here on the forums ... they are not really "articles" yet, but could be made to be with just a little effort. So here's to encouraging all of us to come up with some ideas for articles for the HOTB newsletter and even more importantly, write the articles. Paul, as I mentioned in an earlier conversation, I will be in touch with you for article(s) and/or reports concerning membership news & concerns. Do you have a deadline in mind for submission of articles? Thanks. George Jones |
![]() |
![]() |
![]() |
#3 |
![]() ![]() Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,904
|
![]()
Paul, being someone who is soaking up info as I go, maybe one feature could be related to Restoration/How To articles. There have been several Threads dedicated to re-habbing someone's "Z". I'm probably biased towards these threads since this is "My thing" so to speak.
Another area could be "Who Paid It Forward?" or "Who Helped Who with their list of projects?" Activities and Get Togethers also seem to be a good read. Highlighting some of the tuners, Pete, Marc, SGC, Corey, etc., may also be interesting reading. These things may have been done before yet could still be good educational material, as well as putting a name with a face. Just random thoughts ![]()
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project |
![]() |
![]() |
![]() |
#4 |
![]() Join Date: Mar 2004
Location: Found Member
Posts: 4,346
|
![]()
Good thought's at that Brett
![]() Thank's Paul for stepping up to the plate for the club.
__________________
Frank Urbo. NCM Lifetime member # 982 Registry Founding # 237 |
![]() |
![]() |
![]() |
#5 |
![]() Join Date: May 2010
Location: Japan
Posts: 3,572
|
![]()
P,
Thanks for taking over this huge responsibility. I have never felt smart enough to contribute to tech articles, but I do think that I would like to do what I can to help out. I'll try to think of things to do or suggest and document what I can with some of the projects I have coming up. I have never had anything bad to say about any of the folks that have been making the Registry what it is today and unless you are in their shoes, we have no idea how much work and effort is put forth in the background. Aloha, Craig
__________________
Craig "ZR-1 NO KA 'OI" "ZR-1 ICHIBAN" 1995 #228 Black/Black with Dunn Heads ZR-1 owner since September 2003 ZR-1 Net Registry Founding Member #0074 NCM Lifetime Member #2048 ![]() |
![]() |
![]() |
![]() |
#6 | |
![]() ![]() Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
![]() Quote:
I attended my first conferance call last week - a first lifting of the lid to see what was cookin' in the pot, and to see what it takes to produce this stew we call the Registry. Almost overwhelming - and the dedication to the "minusha" of details and issues that arise! I now have a WHOLE NEW appreciation for the BOARD and time they have volunteered to donate since it's inception! Plenty of opportunity to lend a hand - communicating "stuff" specially! ![]() P.
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
|
![]() |
![]() |
![]() |
#7 |
![]() Join Date: May 2011
Location: Sydney, Australia
Posts: 2,479
|
![]()
I had the opportunity to meet Paul and Ami yesterday for dinner, It was a great opportunity to meet a fellow ZR-1 owner. I had a wonderful time and cant wait to meet the remainder of the FBI guys at Marks for the BBQ. I would not mind seeing a small section in the news letter that is a meet and greet, Take 5 or so Members and get information on them and their car. I chat with a lot of members of the registry and have no clue what they look like or what car they have.
__________________
Robert J. DeMarco [SIGPIC][/SIGPIC] [COLOR=blue]G[/COLOR][COLOR=red]rand[/COLOR] [COLOR=blue]S[/COLOR][COLOR=red]port[/COLOR] Registry Lifetime Member NCM Lifetime Member #2655 Pacecar Registry Member [COLOR=red]ZOOM Charter Member - ZR-1 Owners of Michigan[/COLOR] [COLOR=plum][I]ZR-1[/I] Registry member since 2012 [/COLOR] [COLOR=black]1990 LPE "368" Aerobody ZR-1, Last ZR-1 built by John[/COLOR] 1991 Callaway Aerobody ZR-1, DRM 500 1991 Shinoda Aerobody Spyder, 1998 Pace Car Last edited by cvette98pacecar; 03-11-2012 at 12:19 PM. |
![]() |
![]() |
![]() |
#8 |
![]() ![]() Join Date: Jun 2005
Location: pittsburgh
Posts: 4,633
|
![]()
my father and I ran the local corvette club newsletter for years and I know how had it can be to get stuff together. I'll see what I have kicking around that I can polish up and get out to you
__________________
It's not the car, it's the people - Doug Johnson 90 r/r "KEYS ON" nick named "T.L.B" |
![]() |
![]() |
![]() |
#9 | |
![]() ![]() Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
![]() Quote:
P.
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
|
![]() |
![]() |
![]() |
#10 | |
![]() Join Date: Mar 2010
Location: Fort Myers, FL
Posts: 343
|
![]() Quote:
Is there any preferred format or guidance on the article? Any particular file format? Pictures and picture format okay? etc? Thanks, John
__________________
1992 #043, Aqua/Gray 40k miles |
|
![]() |
![]() |
![]() |
|
|