Bilstein FX3 Shocks

[jrd1990zr1]

Cleaning out the garage and found a set of used Bilstein FX3 shocks. Rather than throw them away, I thought I would offer them here for rebuilding. Two #22113593 with ZB sticker on them. Also have #3057025W000 on them. gears on top are good. Two # 22113594 with Z7 sticker on them. Also have #3037026W000 on them. One has a bad gear on top, one appears to have a slight bend in the shaft. I am selling these as cores for rebuilding. As required by Registry rules, I am posting these for sale at $150.00 plus insured trackable shipping. I will consider a reasonable offer, however. Payment by PayPal friends and family.

[kz098123]

FYI-
Last I checked, Bilstein won?t rebuild shocks with the Delco label as those are considered GM parts. They have to have the Bilstein label.


Sent from my iPhone using ZR-1 Net Registry

[jrd1990zr1]

Originally Posted by kz098123

FYI-
Last I checked, Bilstein won?t rebuild shocks with the Delco label as those are considered GM parts. They have to have the Bilstein label.


Sent from my iPhone using ZR-1 Net Registry

My understanding is that Bilstein considers shocks with a Delco label to be a GM part and there are trademark issues with GM. There are other rebuilders which will rebuild them with a long lead time, such as;

https://deltavee.net/shop/services/b...table-dampers/

New top end gears are available from; www.captainzcnc.com

But if you are going the judging route a rebuild is the way to go. Additionally I hesitate to just throw these away, someone may want to clean them up, have them rebuilt and have them available for future judging.

[jrd1990zr1]

TTT

Someone must need a spare for rebuilding.

Make me an offer, I'm trying to clean out my garage.

[funcars]

I could use some spares for rebuilding - I have a track car with FX3 shocks that were revalved by Bilstein back when they still did it and it has a control box that turned off the speed adjustment. One of them is leaking. I'm an engineer and will rebuild them myself, add a schrader valve and re-valve them to match the leaking set on the car.

[jrd1990zr1]

Originally Posted by funcars

I could use some spares for rebuilding - I have a track car with FX3 shocks that were revalved by Bilstein back when they still did it and it has a control box that turned off the speed adjustment. One of them is leaking. I'm an engineer and will rebuild them myself, add a schrader valve and re-valve them to match the leaking set on the car.

If you want them make me an offer.