88 ZR1 EX5023 Thread - ZR-1 Net Registry Forums

Blue Flame Restorations · 10-17-2010

Went through all of the boxes of parts that Geoff kept when he dis-assembled the car. Some nice surprises! A nice set of 88 dated wheels plus two extra 89 ZR1 wheels.

Console tray insert with KOH (King of the Hill) written on it

-=Jeff=- · 10-17-2010

Sweet project

Blue Flame Restorations · 10-17-2010

Prototype tank (Like Tyler's EX5014) dated 7-8-87

Speedo/tach bezel with hand cut rectangular hole on the far left corner facing from the front.

\
This roughly cut hole was for some wiring during a project, according to Geoff.

This original plate will go back onto the car when finished.

Tyler Townsley · 10-17-2010

[QUOTE}This roughly cut hole was for some wiring during a project, according to Geoff.

QUOTE]

Hole was for this. The item in rear is an ecm with spaces for 5 different calibration chips selectable by dip switches. The other item was velcroed to the dash and was used to read various engine data. There was wireing that was used to remote the ecm to the hatch area through that hole. The picture was taken at Geoffs shop in 98? He used the items to do the calibration to meet emission control levels when he worked for Lotus.

http://deliquescence.net/~tyler/prot...gEquipment.jpg

Wonder where that equipment is. LOL

Tyler

Kevin · 10-17-2010

this is awesome

Corvettes White · 10-17-2010

Very Nice. Is the 8000 rpm lens cracked? George

Blue Flame Restorations · 10-18-2010

Quote:

Originally Posted by Corvettes White

Very Nice. Is the 8000 rpm lens cracked? George

Yes, but I may use it just the way it is unless I can get one silk screened.

Blue Flame Restorations · 10-18-2010

Got the estimate going for the roll over hoop and windshield frame today. Not going to waste any time on this part of the project.

1989ZR1#74 · 10-20-2010

Brett, Looks like fun...

Blue Flame Restorations · 11-18-2010

It was Xmas in Nov today. Picked up these two NOS pieces for the rebuild, plus three empty birdcages that were used by General Tire, Marion, IN for panel fitment. GT made panels for GM. The three birdcage/frames have never been stamped with a vin. Great race car parts. One birdcage/frame will be canilbalized at the frame shop so EX5023 can be made whole again. Roll over hoop and windshield frame parts.

What were the odds of coming across an NOS ZR1 rear upper surround panel and luggage tub???

10-17-2010	#1
Blue Flame Restorations Join Date: Feb 2010 Location: Pendleton, IN Posts: 3,904	88 King Of The Hill ZR1 EX5023 Thread Went through all of the boxes of parts that Geoff kept when he dis-assembled the car. Some nice surprises! A nice set of 88 dated wheels plus two extra 89 ZR1 wheels. Console tray insert with KOH (King of the Hill) written on it __________________ 1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project Last edited by Blue Flame Restorations; 02-03-2011 at 11:07 PM.

10-17-2010	#2
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,162	Re: 88 ZR1 EX5023 Thread Sweet project __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

10-17-2010	#3
Blue Flame Restorations Join Date: Feb 2010 Location: Pendleton, IN Posts: 3,904	Re: 88 ZR1 EX5023 Thread Prototype tank (Like Tyler's EX5014) dated 7-8-87 Speedo/tach bezel with hand cut rectangular hole on the far left corner facing from the front. \ This roughly cut hole was for some wiring during a project, according to Geoff. This original plate will go back onto the car when finished. __________________ 1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project Last edited by Blue Flame Restorations; 12-31-2010 at 06:00 PM.

10-17-2010	#4
Tyler Townsley Join Date: May 2005 Location: Nichols, FL Posts: 615	Re: 88 ZR1 EX5023 Thread [QUOTE}This roughly cut hole was for some wiring during a project, according to Geoff. QUOTE] Hole was for this. The item in rear is an ecm with spaces for 5 different calibration chips selectable by dip switches. The other item was velcroed to the dash and was used to read various engine data. There was wireing that was used to remote the ecm to the hatch area through that hole. The picture was taken at Geoffs shop in 98? He used the items to do the calibration to meet emission control levels when he worked for Lotus. http://deliquescence.net/~tyler/prot...gEquipment.jpg Wonder where that equipment is. LOL Tyler __________________ 55 Polo White (Project) 61 Jewel Blue (Sold to buy above) 66 Nassau Blue 68 Torch Red 88 ZR1 Blue 90 ZR1 White

10-17-2010	#5
Kevin Join Date: Jun 2005 Location: pittsburgh Posts: 4,632	Re: 88 ZR1 EX5023 Thread this is awesome __________________ It's not the car, it's the people - Doug Johnson 90 r/r "KEYS ON" nick named "T.L.B"

10-17-2010	#6
Corvettes White Join Date: Dec 2003 Posts: 477	Re: 88 ZR1 EX5023 Thread Very Nice. Is the 8000 rpm lens cracked? George

10-18-2010	#8
Blue Flame Restorations Join Date: Feb 2010 Location: Pendleton, IN Posts: 3,904	Re: 88 ZR1 EX5023 Thread Got the estimate going for the roll over hoop and windshield frame today. Not going to waste any time on this part of the project. __________________ 1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project

10-20-2010	#9
1989ZR1#74 Join Date: Jan 2009 Location: Scottsdale, AZ Posts: 700	Re: 88 ZR1 EX5023 Thread Brett, Looks like fun... __________________ 1989 ZR-1 #04 Pilot, Advertising/PR Campbell-Ewald S9YKH1 1989 ZR-1 #58 LT5 only 1989 ZR-1 #74 Unreleased Production / PR Dept 9PR110 NCRS #3,182 SACC #2,420 Member Corvette Museum Corvette Forum: "ewjxn" 2009, 2010 Gathering Attendee

11-18-2010	#10
Blue Flame Restorations Join Date: Feb 2010 Location: Pendleton, IN Posts: 3,904	Re: 88 ZR1 EX5023 Thread It was Xmas in Nov today. Picked up these two NOS pieces for the rebuild, plus three empty birdcages that were used by General Tire, Marion, IN for panel fitment. GT made panels for GM. The three birdcage/frames have never been stamped with a vin. Great race car parts. One birdcage/frame will be canilbalized at the frame shop so EX5023 can be made whole again. Roll over hoop and windshield frame parts. What were the odds of coming across an NOS ZR1 rear upper surround panel and luggage tub??? __________________ 1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project Last edited by Blue Flame Restorations; 12-31-2010 at 06:01 PM.