|
![]() |
#1 |
![]() Join Date: Jan 2015
Location: Illinois
Posts: 83
|
![]()
I thought these were chrome but when I got there they are polished. I needed spacers in the back to clear on the inside. I am also going to get longer lug nuts. Got it all together and went to back it out and I heard rubbing so I pulled back in. I found out it was rubbing on the B&B mufflers. I just left it until tomorrow. Also it is about 0 degrees here. I backed it out of the garage and took it about 5 blocks to my heated city building and by the time I got there it was leaking oil which looks like out of rear trans seat but I did not get under there to look yet. There was not a drop on my garage floor, I guess I should not have driven it at all in such cold weather. I did get a pic with the new wheels.
|
![]() |
![]() |
![]() |
#2 |
![]() ![]() Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,904
|
![]()
Looks great!
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project |
![]() |
![]() |
![]() |
#3 |
![]() Join Date: Apr 2004
Location: Germantown, MD
Posts: 738
|
![]() |
![]() |
![]() |
![]() |
#4 |
![]() Join Date: Dec 2005
Location: Tinton Falls, NJ
Posts: 1,177
|
![]()
Are they 18 front 19 rear? If you use a wheel adapter you dont have to do new studs.
![]() |
![]() |
![]() |
![]() |
#5 |
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,696
|
![]()
I'm biased but it's as if those wheels were made for the ZR-1, IMO. Classic.
I used open back lugs for mine. Unfortunately, the plastic caps for the lugs are not quite long enough for the wheel locks. I'd like to replace them w metal caps if I could find them.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX |
![]() |
![]() |
![]() |
#6 |
![]() Join Date: Oct 2004
Posts: 1,889
|
![]()
I'm quite sure I pointed out the stainless caps a very long time ago for you. Your wheel nuts are M24-2 external OR what?
Last edited by WVZR-1; 02-19-2015 at 11:19 AM. |
![]() |
![]() |
![]() |
#7 |
![]() Join Date: Jan 2015
Location: Illinois
Posts: 83
|
![]() |
![]() |
![]() |
![]() |
#8 |
![]() Join Date: Dec 2005
Location: Tinton Falls, NJ
Posts: 1,177
|
![]() |
![]() |
![]() |
![]() |
#9 |
![]() Join Date: Nov 2014
Location: Brooklyn ny
Posts: 1,045
|
![]()
Nice looking wheels ...Enjoy them...Are your stock A molds for sale ? " The ones it came with".?
|
![]() |
![]() |
![]() |
#10 |
![]() Join Date: Jan 2015
Location: Illinois
Posts: 83
|
![]() |
![]() |
![]() |
![]() |
|
|