WTB crank sensor connextor - ZR-1 Net Registry Forums

-=Jeff=- · 04-25-2019

I am looking for the 3 wire crank sensor connector found on the Ignition Module. I can find the harness side but I want the module side connector.. thanks

Image1556229503.716517.jpg

Sent from my iPhone using ZR-1 Net Registry

spork2367 · 04-25-2019

https://www.jerrysgaskets.com/connec...-1990-95-12b5/

-=Jeff=- · 04-25-2019

Thanks but I need the IM side of the connector

spork2367 · 04-26-2019

Quote:

Originally Posted by -=Jeff=-

Thanks but I need the IM side of the connector

I guess I'm unclear as to what you're looking for. The connector in the link is the connector that plugs into the left rear of the module. The connector on the module is molded into the entire case.

Are you just looking for a female connector that would match the cases connector?

If so, it's this one:

https://theelectricaldepot.com/weath...0ae6902b383fa4

secondchance · 04-26-2019

https://www.whiteproducts.com/fusible_link_wire.shtml

Go to the website and download online catalog. Looks like Metri-pack 1508.

secondchance · 04-26-2019

http://www.dstgateway.com/ACDelcoConnectorsV2/#/catalog

Also check PT 2353.

-=Jeff=- · 04-26-2019

Quote:

Originally Posted by secondchance

http://www.dstgateway.com/ACDelcoConnectorsV2/#/catalog

Also check PT 2353.

that might b too wide, but again, I need the mate. I think I might just have to cut the harness, and use the 150 series, then make an 'adapter' to the OEM Crank sensor connector..

-=Jeff=- · 04-26-2019

Quote:

Originally Posted by spork2367

I guess I'm unclear as to what you're looking for. The connector in the link is the connector that plugs into the left rear of the module. The connector on the module is molded into the entire case.

Are you just looking for a female connector that would match the cases connector?

If so, it's this one:

https://theelectricaldepot.com/weath...0ae6902b383fa4

Yes I want the female connector to match the connector on the harness..

I have the one you posted (series 150 and I don't believe it fits.. I will check again, but if I recall it is too wide

Yun,

1508 is the harness side connector, yes, it is a series 150.2 pull to seat. I have not been able to find the female mate to it, that is what I need

essentially I want to plug it into the harness

-=Jeff=- · 04-26-2019

Yes

secondchance · 04-26-2019

Quote:

Originally Posted by -=Jeff=-

Yes

Could this be it?
https://www.aliexpress.com/item/10se...810187129.html

04-25-2019	#1
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,164	WTB crank sensor connextor I am looking for the 3 wire crank sensor connector found on the Ignition Module. I can find the harness side but I want the module side connector.. thanks Image1556229503.716517.jpg Sent from my iPhone using ZR-1 Net Registry __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

04-25-2019	#2
spork2367 Join Date: Jun 2013 Location: PA Posts: 879	Re: WTB crank sensor connextor https://www.jerrysgaskets.com/connec...-1990-95-12b5/

04-25-2019	#3
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,164	Re: WTB crank sensor connextor Thanks but I need the IM side of the connector __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

04-26-2019	#5
secondchance Join Date: Aug 2006 Location: McLean, VA Posts: 3,721	Re: WTB crank sensor connextor https://www.whiteproducts.com/fusible_link_wire.shtml Go to the website and download online catalog. Looks like Metri-pack 1508.

04-26-2019	#6
secondchance Join Date: Aug 2006 Location: McLean, VA Posts: 3,721	Re: WTB crank sensor connextor http://www.dstgateway.com/ACDelcoConnectorsV2/#/catalog Also check PT 2353.

04-26-2019	#9
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,164	Re: WTB crank sensor connextor Yes __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978