|
![]() |
#1 |
![]() Join Date: Oct 2019
Location: Mansfield, TX
Posts: 148
|
![]()
Air pump large hose slides off when tightening the clamp.
Removed air pump to get to the upper shroud 7mm screws to replace the radiator. Push the large, approx 2 inch air inlet hose onto the electric air pump. When the clamp's tightened, it slides off. Blocked hose with a piece of wood underneath and same thing. Only thing I can think of is us RTV and let it set up overnight. Suggestions appreciated. Thanks, Gary .... ![]() |
![]() |
![]() |
![]() |
#2 |
![]() Join Date: Oct 2019
Location: Mansfield, TX
Posts: 148
|
![]()
1st try this morning and the hose stays on the air pump input when clamp tightened.
Werid Gary .... |
![]() |
![]() |
![]() |
|
|