WTB: 94-95 Radio Bezel

[Jcsws6]

Looking for a 94/95 radio bezel with switch. Please let me know if have one available.

[Rick Gibbons]

I saw this on ebay

https://www.ebay.com/itm/14333834032...mis&media=COPY

[Rick Gibbons]

Just realized it was for a LT1 car. You probably already knew about these. Not sure if the reproducer offers one with the cut out for the power switch.

[efnfast]

Mirrock?

[scorp508]

Originally Posted by efnfast

Mirrock?

I am looking for the same part. When I talked to Mirrock at Corvettes at Carlisle he laughed and wished me luck. Which... is true. We're looking for a part less than 1,000 were made.

[Jcsws6]

Originally Posted by scorp508

I am looking for the same part. When I talked to Mirrock at Corvettes at Carlisle he laughed and wished me luck. Which... is true. We're looking for a part less than 1,000 were made.

Agree, I've seen a few people looking for them over the years as well. I dash/interior swapped a 90 so I still have the "full engine power" light. I'm planning on making a bezel for now.

[-=Jeff=-]

Originally Posted by Jcsws6

I dash/interior swapped a 90 so I still have the "full engine power" light.

How far did you go with the dash swap meaning, how much did you have to swap?

[aafc]

When i installed the 4l8OE trans ,i did not want to cut the stock radio bezzel.
I found a good 1990 stock one and modified it to install the power key.
At a swap I sold the 1990 ZR-1 radio bezel to another ZR-1 owner.

https://www.zr1.net/forum/picture.ph...pictureid=4572
You may have to click on zr1.net/forum to see
John

[Jcsws6]

Originally Posted by -=Jeff=-

How far did you go with the dash swap meaning, how much did you have to swap?

I swapped everything but the harness. It was a lot of work but turned out great.

[HAWAIIZR-1]

Sorry, the OP was not interested and I?ll just keep the bezel and switch.