|
![]() |
#1 |
Join Date: Mar 2008
Location: England
Posts: 220
|
![]()
Hi to all
trawled threads for a perfect answer to this Q and cant find so here goes Ive noticed my rotors have become quite pitted and I have a line on a set of clean C5 rotors from a 2001 manual coupe in the UK ..but without callipers...... Q1...can the rotors directly replace front and rear 92 zed stock items, and can l continue to use the stock callipers...... Or is there other work to do ? Dave |
![]() |
![]() |
![]() |
#2 |
![]() Join Date: Dec 2004
Location: Jacksonville, FL USA
Posts: 4,645
|
![]()
Dave, I do believe that swap will not work. C4 rotors are a smaller diameter?
I confess that I'm not 100% sure on this, but I know to do a C5 front conversion to a C4 you need different caliper mounting brackets. A C5 caliper is larger than a C4 ZR-1 caliper, and I do believe a C5 rotor is larger in both diameter and thickness than a ZR-1 C4 rotor. ![]() Tom
__________________
1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member |
![]() |
![]() |
![]() |
#3 |
Join Date: Mar 2008
Location: England
Posts: 220
|
![]()
Thanks for that tom......l was guessing it wasnt going to be a straight swap....may just as well get what fits first time....something that utilizes the stock hub/caliper but with added stopping
|
![]() |
![]() |
![]() |
#4 |
Join Date: May 2005
Location: Leesburg, VA
Posts: 2,713
|
![]()
It's really unlikely it would clear the caliper mounting bracket. That thing sits pretty close to the stock rotor on both sides, and the C5 rotors are .15" thicker.
__________________
Bob Saveland Former owner of #2517 [IMG]http://a.random-image.net/aurora40/vette.jpg[/img] |
![]() |
![]() |
![]() |
|
|