|
|
|
08-08-2009
|
#1 |
  
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
Q on attachement for LT5 pull...
Got the plenum and IHs off, the starter out, and the harness 95% loose. I think I can fab up a plate to utilize the starter bolt holes, but what do you pros recommend for attaching at the front of the motor? (I'm using an engine leveler BTW.)
TIA, Paul.
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
|
|
|
08-08-2009
|
#2 |
 
Join Date: Jul 2004
Location: Kalamazoo MI
Posts: 1,753
|
Re: Q on attachement for LT5 pull...
I use a chain and I bolt it to the front of the LEFT Injector housing and I bolt the other end into the rear of the Right injector housing.
works like a charm.  
__________________
JOHNNY P Currently own 90 ZR-1 #845 DRM 500 engine package 90 #226 Parts car Hit me up if you need anything. |
|
|
|
|
08-09-2009
|
#3 |
Join Date: Feb 2009
Location: Alexandria, Virginia
Posts: 1,467
|
Re: Q on attachement for LT5 pull...
WOW...Sweet!!!
__________________
1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member |
|
|
|
|
08-09-2009
|
#4 |
|
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
Re: Q on attachement for LT5 pull...
Huh...Okey-dokey! Were it a cast iron motor, I'd have had no qualms about similar attachments. But, being this is an aluminum motor, I was concerned about the bolts pulling out of the aluminum. But! Apparently not a big deal. Thanks for responding!
P.
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
|
|
|
|
08-09-2009
|
#5 |
|
Join Date: Jan 2004
Location: Portland, OR
Posts: 1,057
|
Re: Q on attachement for LT5 pull...
Jeff and I did something similar when we pulled my motor. Try to spread the weight out as best you can and don't jerk on anything.
__________________
Robert ZR-1 Net Registry Oregon State Director 91 ZR-1 #431 Black/Black LPE 368 |
|
|
|
|
08-09-2009
|
#6 |
|
Join Date: Jul 2004
Location: Kalamazoo MI
Posts: 1,753
|
Re: Q on attachement for LT5 pull...
I prefer my way 100 times over the "lifting tool" that kent more made.
And all that does is bolt into the aluminum on the Left hand head and the back of the block on the Right hand side. I used that thing once and the front one bent so much I though it was going to break. I like my chain.
__________________
JOHNNY P Currently own 90 ZR-1 #845 DRM 500 engine package 90 #226 Parts car Hit me up if you need anything. |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
