|
|
|
08-06-2009
|
#1 |
 
Join Date: May 2007
Location: Westminster, Maryland
Posts: 3,689
|
Flywheel Removal
Are there any tips or "watch out fors" about remove/reinstall the dual mass flywheel?
I will be replacing the crankshaft rear seal this weekend. Thanks, Jim
__________________
If it isn't fun, you aren't doing it right! 1990 Black ZR-1 - sold 1993 Quasar Blue ZR-1 1994 Competition Yellow ZR-1 1995 Dark Purple ZR-1 Maryland State Coordinator WAZOO Member |
|
|
|
08-06-2009
|
#2 |
 
Join Date: Aug 2006
Location: Edmonton, Alberta or Phoenix, Arizona
Posts: 2,741
|
Re: Flywheel Removal
Biggest one is just to mark the clutch & flywheel with a paint marker or something similar so they go back together in the same orientation to each other. Can have a peak at the pilot bushing while your in there. Mine came out with my pinky finger, made it easy to inspect
 .
__________________
There are no limit's mans ingenuity, just as mans ingenuity will never conquer the forces & behavior of this planet...Smokey Y. |
|
|
|
|
08-06-2009
|
#3 | |
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: Flywheel Removal
Quote:
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
|
|
08-06-2009
|
#4 |
|
Join Date: Aug 2006
Location: Edmonton, Alberta or Phoenix, Arizona
Posts: 2,741
|
Re: Flywheel Removal
I knew me saying that about how easy mine was to come out would get you going. Tell us again Lee, How hard was it to get your's out
 . I pulled mine out with one hand & had a cocktail in the other hand...ice cube's didn't even have a chance to melt the bushing came out so fast  .
__________________
There are no limit's mans ingenuity, just as mans ingenuity will never conquer the forces & behavior of this planet...Smokey Y. |
|
|
|
|
08-06-2009
|
#5 | |
|
Join Date: May 2007
Location: Westminster, Maryland
Posts: 3,689
|
Re: Flywheel Removal
Quote:
 Jim |
|
|
|
|
|
08-06-2009
|
#6 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: Flywheel Removal
Don't let that booger get in your drink.....
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
|
08-06-2009
|
#7 | |
|
Join Date: Aug 2006
Location: Edmonton, Alberta or Phoenix, Arizona
Posts: 2,741
|
Re: Flywheel Removal
Quote:
 .
__________________
There are no limit's mans ingenuity, just as mans ingenuity will never conquer the forces & behavior of this planet...Smokey Y. |
|
|
|
|
|
08-06-2009
|
#8 | |
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
|
Re: Flywheel Removal
Quote:
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
|
08-08-2009
|
#9 |
Join Date: Apr 2007
Location: Northern VA
Posts: 2,661
|
Re: Flywheel Removal
Remember to pull the MAP sensor off the back of the plenum before pulling the transmision
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
