|
|
|
07-23-2009
|
#1 |
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Crankshaft plug...
Well, I was not aware of the crankshaft plug until after I made several attempts to removal the pilot bearing. Needless to say I am alittle worried about the possibility of oil starvation now. I can see the plug is in place, but I am hearing the margin for error is 1/4".
1)any way to know if damage was done? Measurements, etc 2)replacement procedure?
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 Last edited by LGAFF; 07-23-2009 at 10:18 PM. |
|
|
|
07-23-2009
|
#2 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: Crankshaft plug...
Was thinking of measuring with a dial gauge on my spare crank and comparing to the one in the car.
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
|
07-23-2009
|
#3 | |
|
Guest
Posts: n/a
|
Re: Crankshaft plug...
Quote:
|
|
|
|
|
07-24-2009
|
#4 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: Crankshaft plug...
Does the field service manual have the depth listed? It does for the LS6
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
|
07-24-2009
|
#5 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: Crankshaft plug...
Spoke to Marc Haibeck, needs to be pushed in 1/2" before it interfers with oiling. I will pull the Pilot and check proper sealing
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
|
07-28-2009
|
#6 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: Crankshaft plug...
Pulled the pilot..the plug is in place and no issues!
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
|
07-29-2009
|
#7 | |
 
Join Date: Aug 2006
Location: Edmonton, Alberta or Phoenix, Arizona
Posts: 2,741
|
Re: Crankshaft plug...
Quote:
 & say thanks  .
__________________
There are no limit's mans ingenuity, just as mans ingenuity will never conquer the forces & behavior of this planet...Smokey Y. |
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
