|
|
|
06-09-2009
|
#1 |
Join Date: Sep 2006
Location: lone pine and mammoth lakes
Posts: 1,407
|
coilover sprind adjust tool where .....
can i get one .at a reasonable price / are they all the same or do i need some dimensions? can anyone help me out .thanx for any help
|
|
|
|
06-10-2009
|
#2 |
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
|
Re: coilover sprind adjust tool where .....
spanner wrench??
I got mine at Speedway Motors for around $10
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
|
06-10-2009
|
#3 |
|
Join Date: Oct 2004
Posts: 1,890
|
Re: coilover sprind adjust tool where .....
If your coil-over nuts have just tangs/notches then most any will do. The one -=Jeff=- mentions is quite inexpensive and should do. If they're just round nuts with drilled holes you might want a specialty one to keep from destroying the finish.
I had some early Carrera that used the round drilled nuts. The spanner that I have for the QA-1's I've got wouldn't catch them. The hook was to large. If you've round drilled nuts you want a Joe's Spanner with a round pin! |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
