ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 General Postings
Reload this Page Oil catch can
Register FAQ Calendar Search Today's Posts Mark Forums Read

Reply
Page 1 of 3 1 23
 
Thread Tools Display Modes
Old 05-28-2009   #1
secondchance
 
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,723
Default Oil catch can
Once I established it was a generic part, I ran a search for "oil catch can" on fleabay and they are showing up anywhere between $20 (inc. shipping!) to $90.
Some of these look real good with oil level indicator and all.
secondchance is offline   Reply With Quote
Old 05-28-2009   #2
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
Default Re: Oil catch can
be careful, some of the $20 ones have no baffling to separate the oil out
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 05-28-2009   #3
secondchance
 
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,723
Default Re: Oil catch can
Quote:
Originally Posted by -=Jeff=- View Post
be careful, some of the $20 ones have no baffling to separate the oil out
Thanks for heads up.
secondchance is offline   Reply With Quote
Old 05-28-2009   #4
Aurora40
 
Aurora40's Avatar
 
Join Date: May 2005
Location: Leesburg, VA
Posts: 2,713
Default Re: Oil catch can
The ones I'd seen with oil level indicators seemed to be rather large. It would be nice to have the capacity, but I'm not sure where it would fit in the engine bay.
__________________
Bob Saveland
Former owner of #2517

[IMG]http://a.random-image.net/aurora40/vette.jpg[/img]
Aurora40 is offline   Reply With Quote
Old 05-28-2009   #5
bobbyhi
 
bobbyhi's Avatar
 
Join Date: Jul 2005
Location: Mendota Heights, MN. 55120
Posts: 984
Default Re: Oil catch can
Quote:
Originally Posted by Aurora40 View Post
The ones I'd seen with oil level indicators seemed to be rather large. It would be nice to have the capacity, but I'm not sure where it would fit in the engine bay.
Why would you need capacity?? I would think that this would be checked once a week or so and emptied. Hopefully there would not be more that a couple of teaspoons full. I went and looked on ebay and they sure have some that really look pretty cheap. I don't think that I would install a inexpensive one on my car. Just MHO....
__________________
Bob Anderson
1990 #2405 White/Gray
Haibeck chip,4:09 gears,Power Effects Exhaust,5 spoke chrome,C5 brakes,49th Street rockers,K&N,Hurst,Headers,Upper & lower ported

Minnesota State Director
Founding Member #19
bobbyhi is offline   Reply With Quote
Old 05-28-2009   #6
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: Oil catch can
Quote:
Originally Posted by bobbyhi View Post
Why would you need capacity?? I would think that this would be checked once a week or so and emptied. Hopefully there would not be more that a couple of teaspoons full. I went and looked on ebay and they sure have some that really look pretty cheap. I don't think that I would install a inexpensive one on my car. Just MHO....

I Like the one Jeff uses but I need to see how it breaks down and the ease of disassembly first before I pull the trigger. Jeffvette mentioned making one a while back but had zero interest at the time. I dont think thats a true statement anymore
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)
GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 05-28-2009   #7
Aurora40
 
Aurora40's Avatar
 
Join Date: May 2005
Location: Leesburg, VA
Posts: 2,713
Default Re: Oil catch can
Quote:
Originally Posted by bobbyhi View Post
Why would you need capacity?? I would think that this would be checked once a week or so and emptied. Hopefully there would not be more that a couple of teaspoons full. I went and looked on ebay and they sure have some that really look pretty cheap. I don't think that I would install a inexpensive one on my car. Just MHO....
I don't particularly want to have to check under my hood every week, so it would be nice if you could have it go every oil change, or at least a while. But like I mentioned, I don't know that there's a lot of room for a big one.
__________________
Bob Saveland
Former owner of #2517

[IMG]http://a.random-image.net/aurora40/vette.jpg[/img]
Aurora40 is offline   Reply With Quote
Old 05-28-2009   #8
secondchance
 
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,723
Default Re: Oil catch can
Quote:
Originally Posted by Aurora40 View Post
The ones I'd seen with oil level indicators seemed to be rather large. It would be nice to have the capacity, but I'm not sure where it would fit in the engine bay.
I was thinking front right or left. A little long and got to watch out for headlights, though...
secondchance is offline   Reply With Quote
Old 05-28-2009   #9
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
Default Re: Oil catch can
you will not need to check every week

GC, sorry i was watching the kids last night ( wife was out) so I did not get to it..

probably will not be until friday
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 05-28-2009   #10
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: Oil catch can
Quote:
Originally Posted by -=Jeff=- View Post
GC, sorry i was watching the kids last night ( wife was out) so I did not get to it. probably will not be until friday
No sweat bro get to it when you can. Yours is the front runner.
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)
GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Reply
Page 1 of 3 1 23

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Hybrid Mode Hybrid Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 09:59 AM.

Contact Us - ZR-1 Net Registry - Archive - Privacy Statement - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020