|
|
|
05-03-2009
|
#1 |
  
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
Porting is done...FINALLY!
Pete's balls are free to ream out the next virgin set of plenum/IHs!
 Those balls doooo get around, huh? I finished touching up the port matching and initial torquing (will re-torque the IHs this morning). Were it not for the fact the 5/8" freeze plugs I bought (to cap off the secondary bearing ports) turned out to be .040 over, I'd give a fire-up a shot today. But, instead, I guess I'll be relegated to doing some cleaning and maybe some painting (the plenum). I've gotta slap on my new headers and 3" exhaust system, and she'll be ready to terrorize some blacktop...Another addition to the FBI!! Can't wait!!  P. |
|
|
|
05-04-2009
|
#2 |
 
Join Date: Dec 2004
Location: Jacksonville, FL USA
Posts: 4,645
|
Re: Porting is done...FINALLY!
  I hope your "new" toy brings a smile to ya!
__________________
1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member |
|
|
|
|
05-04-2009
|
#3 |
|
Banned
BANNED
Join Date: Oct 2006
Location: MD
Posts: 3,690
|
Re: Porting is done...FINALLY!
Congrats Paul!
Lets see some dyno numbers! David |
|
|
|
|
05-04-2009
|
#4 | |
|
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
Re: Porting is done...FINALLY!
Quote:
!! I'm hoping my loooong taper into the heads was worth 5 hp. I couldn't see putting out the $475 for a one-time reamer to do just that, so I went the hand route. But, if it works out (the hp), I have the specs if someone wants to have one built - sure make that taper into the heads a LOT easier, there's no doubt in my mind! I'm considering having Marc do the TB porting as well - as part of the "whole 500 hp package" (heads next winter's project), but doing it now to spread the $$$ over a bit more time. 400+ rwhp would be shweeeeet at this stage!!  P. |
|
|
|
|
|
05-05-2009
|
#5 |
|
Join Date: Jan 2007
Location: Florida
Posts: 241
|
Re: Porting is done...FINALLY!
Before Aaron at SGC tore mine down I had him Dyno mine. I was putting down 349 hp 348 orq. This with a 375 hp motor and only porting of the plenum, injector housings and air horn. He is now porting the heads, adding headers, resetting the cams plus 3.92 gears and a few other things. I'm hoping to get at or close to 400hp at the wheels. I'll keep you posted.
|
|
|
|
|
05-05-2009
|
#6 |
Join Date: Sep 2006
Location: lone pine and mammoth lakes
Posts: 1,407
|
Re: Porting is done...FINALLY!
on the hp gain with ported inj housings and plenum. corey henderson did mine. we dynod the car before ,with headers flowmaster exhaust ,fidanza flywheel. before it was 373.3 and after the porting as well as coreys tuning she made 409.9. my car is a 90 .
|
|
|
|
|
05-05-2009
|
#7 | |
Join Date: Aug 2006
Location: Edmonton, Alberta or Phoenix, Arizona
Posts: 2,741
|
Re: Porting is done...FINALLY!
Quote:
__________________
There are no limit's mans ingenuity, just as mans ingenuity will never conquer the forces & behavior of this planet...Smokey Y. |
|
|
|
|
|
05-05-2009
|
#8 |
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: Porting is done...FINALLY!
I have always heard no gain from the 63MM TB
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
