|
|
|
03-20-2009
|
#1 |
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
O-rings
What is the part number or alternative part for the fuel injector O-Rings.
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
03-20-2009
|
#2 |
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
|
Re: O-rings
Give Don (KarterDon) a call, he has them. Just bought a set today. $1 apiece.
H 
__________________
90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold. |
|
|
|
|
03-20-2009
|
#3 | |
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
|
Re: O-rings
Quote:
10067600 Seal, Fuel Injector (o-ring, primary) lwr in inj hsg) 8 req'd $6.00/set I have them..... Jerry
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
|
03-20-2009
|
#4 |
|
Join Date: Sep 2005
Location: Washington
Posts: 955
|
Re: O-rings
Hey Jerry do have the o-ring on the front of the crank, for the oil pump.
|
|
|
|
|
03-20-2009
|
#5 | |
|
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
|
Re: O-rings
Quote:
http://jerrysgaskets.com/store/index...products_id=28 The web page shows the individual seal GM part no's, which are the same numbers I use. Jerry
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
|
03-21-2009
|
#6 |
|
Join Date: Sep 2005
Location: Washington
Posts: 955
|
Re: O-rings
maybe I have a old # ?
10067685 |
|
|
|
|
03-21-2009
|
#7 | |
|
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
|
Re: O-rings
Quote:
10135870 is the PN for the Seal, Oil Pump (o-ring) that goes on the crankshaft first, in the groove immediately in front of #1 main. The set I sell is for all 4 o-rings related to installation of the oil pump. I have the OEM carbon seals too, sold separately. Hope this helps. I can take a couple of photos if it helps so you can get the parts you want. Jerry
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
