Teflon Washers in the rear - ZR-1 Net Registry Forums

Hammer · 05-20-2008

I have been searching for the post concerning the teflon washers that go in the rear half shaft area and cause a clicking noise. I have searched and searched and I'll be damned if I can find that post. I have the washers, part #14076924, and want to make sure they go in the right way.

Luckily, I only have one side (the damaged one) apart now so I can check the other side out before reassembly. Course I replaced the rear hubs last year and could have that side Fd up. There's a bevel on the washers. Does that goes towards the inside or outside?

gbrtng · 05-22-2008

Where does this washer go?

bradslt5 · 05-22-2008

ASK CUISINARTVETTE AKA RON . I BELIEVE HE WENT THROUGH THIS NOT TO LONG AGO

Hammer · 05-22-2008

It goes between the rear spindle and the knuckle. I have read in posts here that it can be a source of clicking type noises in the rear.

65ZR1 · 05-22-2008

I believe the bevel goes towards the inside of the car to match the rad on the spindle. Not sure about the teflon since mine are metal.

05-22-2008	#2
gbrtng Join Date: Feb 2006 Location: San Antonio area Posts: 1,179	Re: Teflon Washers in the rear Where does this washer go? __________________ “Buy the best example of what you want, and pay whatever it takes. That way, you cry only once.” ~ Bruce Meyer

05-22-2008	#3
bradslt5 Join Date: Oct 2007 Location: lone pine and mammoth lakes ca. Posts: 544	Re: Teflon Washers in the rear ASK CUISINARTVETTE AKA RON . I BELIEVE HE WENT THROUGH THIS NOT TO LONG AGO

05-22-2008	#4
Hammer Join Date: Apr 2006 Location: Ideho Posts: 2,653	Re: Teflon Washers in the rear It goes between the rear spindle and the knuckle. I have read in posts here that it can be a source of clicking type noises in the rear. __________________ [I][FONT=Comic Sans MS]John Boyd[/FONT][/I] [I][FONT=Comic Sans MS][SIZE=1]Ideho[/SIZE][/FONT][/I] [FONT=Comic Sans MS][SIZE=1][I]2015 ZL1 [/I][I]Camaro #1121 BLACK/BLACK 6 SPD (540 RWHP)[/I][/SIZE][/FONT] [I][FONT=Comic Sans MS][SIZE=1]1991 ZR-1 #458 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK 72[/COLOR]k miles ([B][COLOR=red]SOLD[/COLOR][/B]) 1991 ZR-1 #473 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK [/COLOR]37k miles ([B][COLOR=red]SOLD[/COLOR][/B])[/SIZE][/FONT][/I]

05-22-2008	#5
65ZR1 Join Date: May 2006 Location: Canada Posts: 139	Re: Teflon Washers in the rear I believe the bevel goes towards the inside of the car to match the rad on the spindle. Not sure about the teflon since mine are metal.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

05-20-2008	#1
Hammer Join Date: Apr 2006 Location: Ideho Posts: 2,653	Teflon Washers in the rear I have been searching for the post concerning the teflon washers that go in the rear half shaft area and cause a clicking noise. I have searched and searched and I'll be damned if I can find that post. I have the washers, part #14076924, and want to make sure they go in the right way. Luckily, I only have one side (the damaged one) apart now so I can check the other side out before reassembly. Course I replaced the rear hubs last year and could have that side Fd up. There's a bevel on the washers. Does that goes towards the inside or outside? __________________ [I][FONT=Comic Sans MS]John Boyd[/FONT][/I] [I][FONT=Comic Sans MS][SIZE=1]Ideho[/SIZE][/FONT][/I] [FONT=Comic Sans MS][SIZE=1][I]2015 ZL1 [/I][I]Camaro #1121 BLACK/BLACK 6 SPD (540 RWHP)[/I][/SIZE][/FONT] [I][FONT=Comic Sans MS][SIZE=1]1991 ZR-1 #458 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK 72[/COLOR]k miles ([B][COLOR=red]SOLD[/COLOR][/B]) 1991 ZR-1 #473 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK [/COLOR]37k miles ([B][COLOR=red]SOLD[/COLOR][/B])[/SIZE][/FONT][/I]