|
|
|
03-16-2008
|
#1 |
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Someone was hammered when they put the intake on!
Or at least that has to be the reason the damn gaskets are so far misaligned!
Check this out, 32 mm at some points due to misaligned gaskets. Gasket shows it best, look at the overlap: http://i134.photobucket.com/albums/q...f/DSC02422.jpg http://i134.photobucket.com/albums/q...f/DSC02421.jpg Now I know why someone also put a 64MM TB on a 60MM plenum LGAFF 92 ZR1 #234 |
|
|
|
03-16-2008
|
#2 |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
|
Re: Someone was hammered when they put the intake on!
Lee,
Who's gaskets? |
|
|
|
|
03-16-2008
|
#3 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: Someone was hammered when they put the intake on!
Only marking is a what looks like a small thermostat housing gasket, with I believe RGW in the center.....tiny stamp. Is got a grey gasket material around the oil and water passages, looks like some ROLs, I have had before on my old L98.
You are probably right, bolt holes are in good shape, probably a crappy gasket.....I don't know why you would leave this on if lined up so bad! LGAFF 91 ZR1 #234 Last edited by LGAFF; 03-16-2008 at 09:56 PM. |
|
|
|
|
03-16-2008
|
#4 |
Join Date: Oct 2005
Location: Candy Apple...yUmMy
Posts: 1,137
|
Re: Someone was hammered when they put the intake on!
That stinks...looks like somebody was in a hurry and not double checking their work...bummer!
|
|
|
|
|
03-16-2008
|
#5 | |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
|
Re: Someone was hammered when they put the intake on!
Quote:
|
|
|
|
|
|
03-16-2008
|
#6 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: Someone was hammered when they put the intake on!
These gaskets are black vs the tan color of yours.
LGAFF 92 ZR1 #234 |
|
|
|
|
03-17-2008
|
#7 |
|
Join Date: Oct 2007
Location: lone pine and mammoth lakes ca.
Posts: 544
|
Re: Someone was hammered when they put the intake on!
black gaskets might be factory . if they have a blue ring (printoseal))thay for eure factory . tan one probably white racing
|
|
|
|
|
03-16-2008
|
#8 |
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
|
Re: Someone was hammered when they put the intake on!
May not be a bad gasket at all. I've seen significant core shift in several Injector housings and plenums, all different from one another. I have discussed it with Aaron Scott before and he went so far as to say it's not uncommon and not difficult to deal with when porting.
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
